Cub Cadet 3000 Series Service Manual page 80

Cast Iron Transmission Disassembly15
5. Remove the center hex lock nuts securing the
axle hubs to the axles using a 1-5/16" socket.
See Figure 2.
Center Hex Lock Nut
Figure 2
6. Chock and level the hydrostatic transmission
from below. See Figure 3.
Wooden Chocks
Figure 3
K&T Saw Shop 606-678-9623 or 606-561-4983
www.mymowerparts.com
7.
8.
15A- 4
Remove the hex screw and clamp securing the
hydraulic pickup tube to the charge pump using a
7/16" socket. See Figure 4.
Hex Screw and Clamp
Figure 4
Remove the hex screw and clamp securing the
hydraulic pickup tube to the transmission hous-
ing using a 7/16" socket. See Figure 5.
Hex Screw and Clamp
Figure 5