Using A Smartphone With The Tv - Sharp Aquos LC-70UD1X Operation Manual

AQUOS LINK
AQUOS LINK control
Auto power on
Selecting recorder
Selecting channel key
Using genre info.
Audio return channel
Connection for using "Audio return channel"
• You need to use ARC-compatible cables/devices and connect to the HDMI1 terminal to activate this function. The connection
method is the same as Connecting an AQUOS BD player/AQUOS recorder via the AQUOS AUDIO speaker system
(Page 33).

Using a Smartphone with the TV

This function enables you to connect the TV to a smartphone that supports Mobile High-Definition Link (MHL) using an
MHL-compatible cable.
To connect the TV to your MHL-compatible smartphone, be sure to use an MHL-compatible cable (commercially
available).
• You can view pictures and video on a large screen.
• You can play back music files.
NOTE
• An MHL-compatible portable device is required to use this function. Connect the device to the HDMI 4 terminal.
• This production incorporates MHL I.
Set to "On" to enable HDMI CEC functions.
If this is activated, the one touch play function
is enabled. While the TV is in standby mode, it
automatically turns on and plays back the image from
the HDMI source.
Here, you can select a recorder for the recording from
several connected recorders.
This function allows you to select the channel of the
connected HDMI device using the TV's remote control
unit.
Press a/b to select the input source of the connected
HDMI device you want to control using the TV's remote
control unit, and then press ?.
Press c/d to select "On", and then press ?.
This function allows you to automatically switch to
the appropriate sound mode depending on the genre
information included the digital broadcast.
If this function is set to "Auto", the TV can send audio
data for video content shown on the TV to a connected
audio device with just one ARC-compatible cable. Using
this function eliminates the need to use a separate
digital or analogue audio cable.
MHL-compatible cable
• The factory default for this item is "Off".
• If you have connected the AQUOS AUDIO speaker
system between the TV and an AQUOS recorder,
the external source's indication changes (e.g., from
"HDMI1" to "HDMI1 (Sub)").
• The ARC (Audio Return Channel) function works only
when using the HDMI1 terminal.
(DC 5V 900mA)
HDMI 4 terminal (Rear side)
35