Connecting To The Network; Wired Installation; Wireless Installation - Sharp Aquos LC-70UD1X Operation Manual

Network function

Connecting to the network

To enjoy internet services, you need to connect the
TV to a router with a high speed connection to the
internet. You can also connect the TV to your Home
network server through a router or access point. The TV
connection to the router can either be wired or wireless.
NOTE
• If you choose a wired connection to the router, you need an
ETHERNET cable (commercially available).
• If you do not have a broadband internet connection, consult
the store where you purchased your TV or ask your internet
service provider or telephone company.
• An ETHERNET and wireless connection cannot be used at
the same time. Use only one of the connection types.
• A stable connection speed is required to play back streaming
content, otherwise you may not be able to watch normally.

Wired installation

Use an ETHERNET cable to connect the ETHERNET
terminal on the TV to your broadcast router as shown
below. This is recommended when enjoying services
which require stable connection speeds, such as
streaming media.
E
Wired connection overview

PC (home network server)

Router (commercially available)

ETHERNET cable (commercially available)

Network
E
How to connect
Router
LAN

ETHERNET cable (commercially available)
1
Switch on the router (commercially available).
Refer to the router's operation manual for
switching on.
2
Connect the ETHERNET terminal on the TV
to the router (commercially available) with an
ETHERNET cable (commercially available).
E
3
4
5
6
E
3
4
5
ETHERNET terminal
Use the wireless LAN USB adapter (supplied accessory).
E




When using Easy setup function
Refer to "How to connect".
Go to "HOME" > "TV Menu" > "Setup" >
"View setting" > "Network setup" > "LAN setting"
> "Easy setup".
Press c/d to select "Yes", and then press ?.
Press a/b to select "Wired", and then press ?.
Please input according to direction of a screen,
and finally input "Complete".
When using Manual setup function
Refer to "How to connect".
Go to "HOME" > "TV Menu" > "Setup" >
"View setting" > "Network setup" > "LAN setting"
> "Manual setup" > select "Yes" > "Connection
type".
Press c/d to select "Wired", and then press ?.
Select "OK" to confirm.
• The wired connection will be automatically established.
• If you have failed to connect to the internet in the above
operation, an error message will appear. In this case,
press b to return to the normal TV screen and check
the relevant settings.
NOTE
• To change the settings manually, go to "HOME"
>
"Network setup" "IP setup" and follow the on-screen
instructions and the operation manual of the router.
TV
Connection type
Wireless setup
IP setup
IP address
Netmask
Gateway
DNS
MAC address

Wireless installation

Wireless connection overview
PC (home network server)
Wireless LAN router/access point
Wireless LAN USB adapter (supplied accessory)
Network
>
Setting Ethernet info.
[Current setup]
: Auto
: Auto
: Auto
: Auto
: xx:xx:xx:xx:xx:xx
Change
Initialize
53