Download
Share
Print this page
  1. Manuals
  2. Brands
  3. Sharp Manuals
  4. LED TV
  5. LC-60G9T
  6. Service manual

Sharp LC-60G9T Service Manual

Led backlight tv
Hide thumbs

Advertisement

Quick Links

TopPage
In the interests of user-safety (Required by safety regulations in some countries) the set should be restored to its orig-
inal condition and only parts identical to those specified should be used.
PRECAUTION................................................i
OUTLINE
[1] OUTLINE...........................................iii
[1] SPECIFICATION.................................1-1
[1] DIMENSIONS ...............................................3-1
CHAPTER 4. REMOVING OF MAJOR PARTS
[1] REMOVING OF MAJOR PARTS...........4-1
Parts marked with "
" are important for maintaining the safety of the set. Be sure to replace these parts with specified ones for maintaining the
safety and performance of the set.
SERVICE MANUAL
CONTENTS
..................2-1
No.S83M276070G9T
LED BACKLIGHT TV
MODEL :
[1] ADJUSTMENT....................................5-1
[1]
TROUBLESHOOTING TABLE .........................6-1
[1]
MAJOR IC INFORMATION.........................
[1]
SYSTEM BLOCK DIAGRAM............................8-2
[1]
Main Unit ..........................................................9-1
[1]
DIAGRAM.........................................................10-1
Parts Guide
This document has been published to be used for
after sales service only.
The contents are subject to change without notice.
LCD KIT
LC-60G9T
LC-70G9T
7-1

Advertisement

loading

Related Manuals for Sharp LC-60G9T

Summary of Contents for Sharp LC-60G9T

  • Page 1: Table Of Contents

    LCD KIT SERVICE MANUAL No.S83M276070G9T LED BACKLIGHT TV LC-60G9T MODEL : LC-70G9T In the interests of user-safety (Required by safety regulations in some countries) the set should be restored to its orig- inal condition and only parts identical to those specified should be used.

  • Page 2: Safety Precaution

    AC voltage SAME TYPE FUSE. drop across the resistor. F7001 (250V 5A) -LC-60G9T All checks must be repeated with the AC cord plug connection reversed. (If necessary, a nonpolarized adaptor plug must be used -LC-70G9T only for the purpose of completing these checks.)

  • Page 3: Precaution For Using Leed-Free Solder

    LC-60G9T / LC-70G9T PRECAUTIONS FOR USING LEAD-FREE SOLDER Employing lead-free solder • “PWBs” of this model employs lead-free solder. The LF symbol indicates lead-free solder, and is attached on the PWBs and service manuals. The alphabetical character following LF shows the type of lead-free solder.

  • Page 4: Outline

    LC-60G9T / LC-70G9T OUTLINE MAJOR SERVICE PARTS PWB Unit Ref NO. PARTS CODE DESCRIPTION LC-60G9T DKEYFM216FMG3 RUNTKB116WJQZ DUNTKG016FMG1 DUNTKF800FMF8 DUNTKG017FMF7 DUNTKG215FMG2 -Con Unit LC-70G9T DKEYFM216FMG4 RUNTKB118WJQZ DUNTKG016FMG1 DUNTKF800FMF8 DUNTKG017FMF7 DUNTKG215FMG2 -Con Unit OTHER unit Ref NO. PARTS CODE DESCRIPTION LC-60G9T...

  • Page 5: Chapter 1. Specifications

    The HDMI 2 and 電腦  (PC) terminals can both use the same audio input terminal. • As a part of our policy of continuous improvement, SHARP reserves the right to make design and specification changes for product improvement without prior notice. The performance specification figures indicated are nominal values of production units. There may be some deviations from these values in individual units.

  • Page 6: Chapter 2. Operation Manual

    LC-60G9T / LC-70G9T CHAPTER 2. OPERATION MANUAL [1] OPERATION MANUAL Part names and functions TV (front view) 電源 (POWER) 目錄 (MENU) 輸入 (INPUT) 頻道 r / s (CH r / s ) 音量 e / f (VOL e / f ) 3D infrared emitter *...
  • Page 7 Antenna terminals ( 無線電視/ 有線電視) Regarding details of Skype, visit the following website. skype: http://www.skype.com or Sharp: http://www.aquos-world.com The HDMI 2 and 電腦 terminals can both use the same audio input terminal (聲音輸入  (HDMI 2/電腦) (AUDIO IN) (HDMI 2/PC)). However, the proper item must be selected in the “Audio select” menu .
  • Page 8 LC-60G9T / LC-70G9T Part names and functions Remote control unit Select between 3D and 2D image viewing . a/b/c/d (Cursor) Select a desired item on the setting screen. ? (ENTER) Execute a command. 10 退出 ( EXIT ) Turn off the On-Screen Display .
  • Page 9 LC-60G9T / LC-70G9T Attaching the stand unit • Before attaching (or detaching) the stand, unplug the AC   4 Insert and tighten the M5 screws (length: 14 mm)  cord. into the holes on the rear of the TV. • Before performing work, spread cushioning over the surface on which you will be laying the TV. This will prevent it from M5 screws being damaged.

  • Page 10: Chapter 3.Dimensions

    LC-60G9T / LC-70G9T CHAPTER 3. DIMENSIONS [1] DIMENSIONS Dimensional drawings LC-70G9T (28) (58) (1578) (1539) (178) (640) (385) (400) (621) LC-60G9T (28) (58) (1378) (1329) (178) (385) (640) (400) (575) Active area Thinnest part (except of terminal height) NOTE • Dimensions do not include protrusions such as screws and some parts.
  • Page 11 CHAPTER 4. REMOVING OF MAJOR PARTS 1. Removing of Stand Unit and Rear Cabinet Ass'y. (LC-60G9T/ LC-70G9T) 1. Remove the 1 lock screw and detach the Stand Safety Cover Ass'y. 2. Remove the 4 lock screws and detach the Stand Unit.
  • Page 12 LC-60G9T / LC-70G9T 2. Removing of Speaker (L/R) and KEY Unit. ( LC-60G9T ) 1. Remove the 1 lock screw and the 4 Hooks and detach the Bottom Cover Ass’y 2. Detach the Speaker (L) , Speaker (R) 3. Detach the KEY Unit Ass'y 4.
  • Page 13 LC-60G9T / LC-70G9T 3. Removeing of Connectors and Decoration Cover, Front Cover Ass'y and Back Light Support Angle Bottom Ass'y. ( LC-60G9T ) 1. Disconnect the following connectors from MAIN Unit. (SB,PD,LV) 2. Disconnect the following connectors from POWER/DRIVE Unit. (L1,PD) 3.
  • Page 14 LC-60G9T / LC-70G9T 2. Removing of Bottom cover, Speaker(L/R), KEY Unit Ass'y.( LC-70G9T ) 1. Remove the 1 lock screw and the 4 Hooks and detach the Bottom Cover Ass’y 2. Detach the Speaker (L) , Speaker (R) 3. Detach the KEY Unit Ass'y 4.
  • Page 15 LC-60G9T / LC-70G9T 3. Removeing of Connectors and Decoration Cover, Front Cover Ass'y and Back Light Support Angle Bottom Ass'y. ( LC-60G9T ) 1. Disconnect the following connectors from MAIN Unit. (SB,PD,LV) 2. Disconnect the following connectors from POWER/DRIVE Unit. (L1,PD) 3.

  • Page 16: Chapter 5. Adjustment

    LC-60G9T / LC-70G9T CHAPTER 5. ADJUSTMENT [1] ADJUSTMENT [1] ADJUSTMENT PROCEDURE Main unit supplied as service unit was adjusted on some item. However, W/B adj is not finished because it needs to be done by final set condition. So the main unit is in the adjustment condition when it is supplied and K mark is shown up in display when you use it.
  • Page 17 LC-60G9T / LC-70G9T 2.2.3 How to upgrade the software 1. Unplug the AC cord. 2. Insert the USB Memory for version upgrade into USB1. 3. Plug in the AC cord with power button pressed down. 4. After 5 seconds, unpress the power button.
  • Page 18 LC-60G9T / LC-70G9T 2.3. Monitor microprocessor software version upgrade Create the USB memory for monitor microprocessor software version upgrade in the same manner as explained in the “Main software version upgrade”. Copy the file XIAN_G9T_XXX.USB and XIANSUBxxx.SMB. (named temporarily) for monitor microprocessor software version upgrade to the USB memory.
  • Page 19 LC-60G9T / LC-70G9T 3. Entering and exiting the adjustment process mode 1) Before entering the adjustment process mode, the AV position RESET in the video adjustment menu. 2) While holding down the “VOL(-)” and “INPUT” keys at a time, plug in the AC cord of the main unit to turn on the power.
  • Page 20 LC-60G9T / LC-70G9T 5. List of adjustment process mode menu The character string in brackets [ ] will appear as a page title in the adjustment process menu header. , l i 1/20 t i n t i n T-CON Version / LED CON Version xxxxxxxx/xxxx T-CON/H.264 Version...
  • Page 21 LC-60G9T / LC-70G9T , l i 5/20 INSPECT USB TERM PORT ALL : - - - - - - Reading inspection of USB memory terminal MONIDATA READ [TEMP/OPC] MONITOR Temperature/OPC Acquisition tool. 6/20 7/20 8/20 9/20 10/20 11/20 12/20 t i n...
  • Page 22 LC-60G9T / LC-70G9T , l i 14/20 T-CON VERSION EXT.1 T-CON VERSION EXT.2 T-CON VERSION EXT.3 T-CON VERSION EXT.4 15/20 3D HDMI FPGA Version 2D 3D FPGA Version 16/20 CROSS TALK TH1 CROSS TALK TH2 CROSS TALK TH3 CROSS TALK TH4...
  • Page 23 LC-60G9T / LC-70G9T 6. Special features STANDBY CAUSE (Page 1/20) Display of a cause (code) of the last standby The cause of the last standby is recorded in EEPROM whenever possible. Checking this code will be useful in finding a problem when you repair the troubled set.
  • Page 24 LC-60G9T / LC-70G9T Communication Error H Regular communication Time-out Power supply Error1 PS_ON(AC_DET) Error Power supply Error 2 D_POW(DET_13V) Error Power supply Error 3 D_POW(DET_D3V3) Error Power supply Error 5 Panel Power Error LCD TV ADJUSTMENT ITEM 1. MICON SOFTWARE DATA INPUT...
  • Page 25 [ Adjustment Location ] 9.2) PICTURE ADJUSTMENT (9.2.1) Equipment confirmation Before adjustment, need to confirm that Adjustment equipment and signal generator have set to SHARP LCD US used. Confirmation of signal from generator (setting to spec level) 0.714Vp-p ± 0.02Vp-p (pedestal to white level) Composite signal (NTSC)[For ‘T’...
  • Page 26 LC-60G9T / LC-70G9T ( 9.2.2 ) Adjustment Mode Adjustment Mode Press the test key at the test remote control (9.2.3) PAL Signal Adjustment [For ‘X’ model ONLY. Skip for ‘T’ model] Setting [Signal] Feed the PAL Full-field Colour Bar signal(75% colour...
  • Page 27 LC-60G9T / LC-70G9T (9.2.5) SECAM Signal Adjustment [For ‘X’ model ONLY. Skip for ‘T’ model] Setting [Signal] Feed the SECAM Full-field Colour Bar signal(75% colour SECAM Full-field saturation) to INPUT 6 Colour Bar [Terminal] INPUT 6 100% White Black Video Input...
  • Page 28 LC-60G9T / LC-70G9T (9.2.7) Component 15K Adjustment [For ‘X’ and ‘T’ model] Setting [For ‘X’ model] Feed the COMPONENT 15K 50Hz (576i) 100% Full-field [Signal] Colour Bar signal(100% colour saturation) to COMP 15K 50Hz COMPONENT INPUT 5 (576i) 100% Full-field...
  • Page 29 LC-60G9T / LC-70G9T [For ‘T’ model] [Signal] Feed the COMPONENT 33K 60Hz (1080i) 100% Full-field COMP 33K 60Hz Colour Bar signal(100% colour saturation) to (1080i/60Hz) COMPONENT INPUT 5 100% Full-field Colour Bar [Terminal] 100% White Black COMPONENT INPUT 5 2 Auto Adjustment [For ‘X’...
  • Page 30 LC-60G9T / LC-70G9T WHITE BALANCE ADJUSTMENT/ GAMMA ADJUSTMENT 10.1 White Balance Adjustment / Gamma Adjustment For the details of white balance adjustment procedure, please refer Brightness Setting to white balance adjustment spec for Kameyama model ver 1.9. AV MODE: DYNAMIC 1.
  • Page 31 LC-60G9T / LC-70G9T 464×6 /916 (464×6 /916)( ± Point 2 (cd/m LEV20 GCC2**** 296×6 /916 MG2G**** (296×6 /916)( MG2Y**** ± MG2B**** (cd/m MG2R**** Point 1 180×6 /916 LEV10 (180×6 /916)( GCC1**** ± MG1G**** 9 MSET0003 MG1Y**** MG1B**** MG1R**** 10 MIN MAX...
  • Page 32 LC-60G9T / LC-70G9T 11 ). KEY DATA INPUT 11.1) EDID DATA INPUT ( Main PWB : QPWBXG216WJ**) HDMI EDID Inspection mode 1. Enter the Adjustment Mode. INPUT ANALOG RGB Confirm the file 2. Move cursor at [HDMI EDID WRITE] and press [ENT] key.
  • Page 33 LC-60G9T / LC-70G9T Factory setting AC power off to exit the Go to adjustment mode page [2/33], move cursor at [INDUSTRY INIT] factory setting. and press [OK] at Remote control. For X model, please select destination either AUSTRALIA COUNTRY of AUSTRALIA...
  • Page 34 LC-60G9T / LC-70G9T [2] PUBLIC MODE SETTING PROCEDURE 1. How to start Public Mode Starting the Public Mode • There is one following ways to display the PUBLIC Mode setting screen. 1) Method of needing password a) Press the "INPUT" and "VOL (+)" keys on the set at once and turn on the power.
  • Page 35 LC-60G9T / LC-70G9T 4. Public Mode Menu The guidance is not displayed on screen. Setup procedure To move the cursor up and down, use the “cursor UP/DOWN” key (remote controller) and “CH ( )” key (remote controller and set). To change the settings, use the “cursor RIGHT/LEFT” key (remote controller) and “VOL (+)/(–)” key (remote controller and set).
  • Page 36 LC-60G9T / LC-70G9T 5. On Setting Items 1) Power ON fixed [POWER ON FIXED] Option “VARIABLE”, “FIXED_ALL”, “FIXED_BODYKEY” or “RCRESPOND” (loop enabled) Default “VARIABLE” Function • VARIABLE : “POWER/RECEPTION” key on TV unit or remote control is enabled. • FIXED_ALL : “POWER/RECEPTION”...
  • Page 37 LC-60G9T / LC-70G9T 4) Volume fixed [VOLUME FIXED] Option “VARIABLE”, “FIXED”, “ACCTRL” or “AC/RCCTRL” (loop enabled) Default “VARIABLE” Function • VARIABLE : The volume is not fixed. • FIXED : The volume is fixed to the value adjusted in the volume fixed level.
  • Page 38 LC-60G9T / LC-70G9T 8) Menu operation [MENU BUTTON] Option “RESPOND” or “NO RESPOND” (loop enabled) Default “RESPOND” Function The MENU key on the main unit and remote control is decided whether it is enabled or disabled. Exception • RESPOND : The manu key is enabled.
  • Page 39 LC-60G9T / LC-70G9T 11) Start mode [INPUT MODE START] Option “NORMAL” or “Input source 1 (input selection or channel)” ... (loop enabled) Default “NORMAL” Function Which kinds of input source or channel is decided when the power turning on. NORMAL : The content of the last memory is followed.
  • Page 40 LC-60G9T / LC-70G9T 15) 232C power ON control [232C POWON] Option “ENABLE” or “DISABLE” (loop enabled) Default DISABLE Function The item decide whether Power ON by the 232C command is enabled/disabled in the standby state. The same function as 232C command “RSPW”.
  • Page 41 LC-60G9T / LC-70G9T [3] USB Clone Specifications Input “369” as password on the copy mode screen using the same input method as Public Mode on the previous page. 1. Screen Specifications (copy mode <TV USB>) • TV USB (sucking from TV) <FIG 1>...
  • Page 42 LC-60G9T / LC-70G9T 3. USB Clone Restrictions • Be sure to set the network setting (Setup/View setting/Network setup) after writing the data by USB Clone (USB TV). • Use USB memory with a memory capacity of 1M byte or greater.

  • Page 43: Chapter 6. Troubleshooting Table Troubleshooting Table

    LC-60G9T / LC-70G9T CHAPTER 6. TROUBLESHOOTING TABLE [1] TROUBLESHOOTING TABLE [1] TROUBLESHOOTING TABLE The sound is not emitted from the Speaker & Woofer though the picture has come out. No sound output in all modes? Do audio signals output from pins of IC3301 (Digital AV decode & Main CPU) ? Check IC3301 and its peripheral circuits.
  • Page 44 LC-60G9T / LC-70G9T No sound (during the reception of TV(ANALOG) broadcasting) Does not the sound go out though the picture has come out when UHF/VHF is received? In the case of LE950,951 series , refer to (A) In the case of G9T series , refer to (B) Does SIF signal output from pin (8) of TUNER (TU1105) ? Check the tuner and its peripheral circuits.
  • Page 45 LC-60G9T / LC-70G9T No sound from external input devices (1) Does not the sound of the audio signal input to EXT 2 go out? Do audio signals input to pins[7/CVBS1_IN_R, 8/CVBS1_IN_L] of EXT2(J510)? Check the setting of an external input device that con- Is CVBS_PLUG [9/CVBS1_PLUG] of J510 at "L"...
  • Page 46 LC-60G9T / LC-70G9T No sound from external input devices (3) Does not the sound of the audio signal input to HDMI-2 mode go out? Does not the sound of the audio signal input to PC/Component mode go out? Check whether it is selected "HDMI+Analog" by the Audio select Check whether it is selected "Video+Audio"...
  • Page 47 LC-60G9T / LC-70G9T No sound from external output device (5) No sound from HEAD PHONE_OUTPUT/ AUDIO_OUTPUT terminal. Does not the sound of the audio signal output to Headphone mode go Does not the sound of the audio signal output to Audio out mode go...
  • Page 48 LC-60G9T / LC-70G9T No sound from external output device (7) Does not the sound of the audio signal output to HDMI1 go out? Does audio signal output from pin[14] of SC1501 (HDMI1 terminal) ? Check SC1501 and peripheral circuits. Does audio signal output from pin[39/HECP] of IC2601(HDMI-SW) ? Check the line between IC2601 and SC1501.
  • Page 49 LC-60G9T / LC-70G9T No picture on the display (2) Does not the picture come out when VHF/UHF is received? Does video signal (CVBS) output from pin[9] of TUNER(TU1105) ? Check the tuner and its peripheral circuits. Replace as required. Does video signal (TUNER_CVBS) input to pin [AN29/ Check the line between TU1105 and IC3301.
  • Page 50 LC-60G9T / LC-70G9T [External input EXT2] No picture on the display (5) Does not the picture of the CVBS signal input to EXT2 go out? Does CVBS signal input to pin[10] o f EXT2 (J510) ? Check the setting of an external input device that connects with Is CVBS_PLUG [9/CVBS1_PLUG] of J501 at "L"...
  • Page 51 LC-60G9T / LC-70G9T [External input HDMI-1/2/3/4] No picture on the display (8) Does not the picture/sound of the HDMI signal input to HDMI-1/2/3/4 go out? Is the Hot plug detection function output from pin [19] of the HDMI- Check the line between SC1501 and pin[59] of IC2601(HDMI- 1(SC1501) normal ? SW).
  • Page 52 LC-60G9T / LC-70G9T [External input Network] No picture on the display Does not the signal input to Network go out? Does the signal in/output to pins(1),(2),(3),(6) of LAN-jack Check the interface device and peripheral circuits. (J9401)? (power-LED of hub, LINK-LED of hub) Do signals in/output to pins of IC3301 (Digital AV decode &...
  • Page 53 LC-60G9T / LC-70G9T No light (Back Light doesn't light) Is the AC cord connector tightly connected to the set? Reconnect the AC cord tightly and turn on the power again. Are the wire harnesses and other cables properly connected in Reconnect the wire harnesses and other cables properly in the set.

  • Page 54: Chapter 7. Major Ic Informations Major Ic Information

    LC-60G9T / LC-70G9T CHAPTER 7. MAJOR IC INFORMA- TIONS [1] MAJOR IC INFORMATIONS [1] MAJOR IC INFORMATIONS 1. MAJOR IC INFORMATIONS 1.1. IC2601 (VHiSii9387A-1Q) This IC is 5 input and 1 output HDMI port processor. The TMDS cores run at 2.25Gbps. (Supports video resolutions up to 1080p, 60Hz, 12bit.) The adaptive equalizer provides long cable support.
  • Page 55 LC-60G9T / LC-70G9T 1.11. IC1702 (VHiMAX 97220 -1Y) This IC is audio amplifier for line-out/head-phone. 1.12. IC1703 (VHiYSS952QZ-1Y) Audio DSP (YSS952QZ) has digital audio adjustment function (for example, PEQ, bass/treble, balance, bass enhancer, etc.) and adjusts TVs audio quality. 7 – 2...

  • Page 56: Chapter 8. Overall Wiring/Block Diagram

    LC-60G9T / LC-70G9T CHAPTER 8. OVERALL WIRING BLOCK DIAGRAM [1] SYSTEM BLOCK DIAGRAM 8 – 1...
  • Page 57 LC-60G9T / LC-70G9T 8 – 2...
  • Page 58 LC-60G9T / LC-70G9T [2] OVERALL WIRING DIAGRAM 8 – 3...
  • Page 59 LC-60G9T / LC-70G9T 8 – 4...
  • Page 60 LC-60G9T / LC-70G9T 8 – 5...

  • Page 61: Chapter 9. Printed Wiring Board Assemblies

    LC-60G9T / LC-70G9T CHAPTER 9. PRINTED WIRING BOARD ASSEMBLIES [1] MAIN Unit MAIN UNIT (A-PATTERN ) 9 – 1...
  • Page 62 LC-60G9T / LC-70G9T RN ) 9 – 2...
  • Page 63 LC-60G9T / LC-70G9T MAIN UNIT ( A-SYMBOL ) 9 – 3...
  • Page 64 LC-60G9T / LC-70G9T 9 – 4...
  • Page 65 LC-60G9T / LC-70G9T MAIN UNIT ( CHIP SIDE-A ) 9 – 5...
  • Page 66 LC-60G9T / LC-70G9T 9 – 6...
  • Page 67 LC-60G9T / LC-70G9T MAIN UNIT ( B-PATTERN ) 9 – 7...
  • Page 68 LC-60G9T / LC-70G9T 9 – 8...
  • Page 69 LC-60G9T / LC-70G9T MAIN UNIT ( B-SYMBOL ) 9 – 9...
  • Page 70 LC-60G9T / LC-70G9T 9 – 10...
  • Page 71 LC-60G9T / LC-70G9T MAIN UNIT ( CHIP SIDE B ) 9 – 11...
  • Page 72 LC-60G9T / LC-70G9T 9 – 12...
  • Page 73 LC-60G9T / LC-70G9T TCON UNIT ( A-PATTERN ) 9 – 13...
  • Page 74 LC-60G9T / LC-70G9T 9 – 14...
  • Page 75 LC-60G9T / LC-70G9T TCON UNIT ( A-SYMBOL ) 9 – 15...
  • Page 76 LC-60G9T / LC-70G9T 9 – 16...
  • Page 77 LC-60G9T / LC-70G9T TCON UNIT ( CHIP SIDE A ) 9 – 17...
  • Page 78 LC-60G9T / LC-70G9T 9 – 18...
  • Page 79 LC-60G9T / LC-70G9T TCON UNIT ( B PATTERN ) 9 – 19...
  • Page 80 LC-60G9T / LC-70G9T 9 – 20...
  • Page 81 LC-60G9T / LC-70G9T T-CON UNIT ( B-SYMBOL ) 9 – 21...
  • Page 82 LC-60G9T / LC-70G9T 9 – 22...

  • Page 83: Chapter 10. Schematic Diagram Description Of Schematic Diagram

    LC-60G9T / LC-70G9T CHAPTER 10. SCHEMATIC DIA- GRAM [1] DESCRIPTION OF SCHEMATIC DIA- GRAM 10 – 1...
  • Page 84 LC-60G9T / LC-70G9T 10 – 2...
  • Page 85 LC-60G9T / LC-70G9T 10 – 3...
  • Page 86 LC-60G9T / LC-70G9T 10 – 4...
  • Page 87 LC-60G9T / LC-70G9T 10 – 5...
  • Page 88 LC-60G9T / LC-70G9T 10 – 6...
  • Page 89 LC-60G9T / LC-70G9T 10 – 7...
  • Page 90 LC-60G9T / LC-70G9T 10 – 8...
  • Page 91 LC-60G9T / LC-70G9T 10 – 9...
  • Page 92 LCD PANEL 60G9T/ LC-70G9T ) MAIN UNIT ( DUNTKG216MG3 / PACKING PARTS ( NOT REPLACE- DUNTKG216MG4 ) MENT ITEM ) ( LC-60G9T ) CABINET AND MECHNICAL PACKING PARTS ( NOT REPLACE- PARTS ( LC-60G9T ) MENT ITEM ) ( LC-70G9T )
  • Page 93 PRICE PART PARTS CODE DESCRIPTION RANK MARK RANK [1] PRINTED WIRING BOARD ASSEMBLIES DKEYFM216FMG3 MAIN Unit ( LC-60G9T ) DKEYFM216FMG4 MAIN Unit ( LC-70G9T ) RUNTKB116WJQZ POWER Unit ( LC-60G9T ) RUNTKB118WJQZ POWER Unit ( LC-70G9T ) DUNTKG016FMG1 LED/RC Unit...
  • Page 94 LC-60G9T / LC-70G9T [4] CABINET AND MECHNICAL PARTS ( LC-60G9T ) KEY UNIT CONTROL Unit MAIN UNIT 60 INC LCD PANEL POWER DRIVE UNIT Wi-Fi Unit LED,R/C UNIT IR unit 4-12...
  • Page 95 LC-60G9T / LC-70G9T PRICE PART PARTS CODE DESCRIPTION RANK MARK RANK [4] CABINET AND MECHNICAL PARTS ( LC-60G9T ) VESA ANGLE ASSEMBLY, x4 CANGKD506WJ01 TERMINAL ANGLE BOTTOM ASSEMBLY CANGKE053WJ01 TERMINAL ANGLE SIDE ASSEMBLY CANGKE052WJ02 CCABBC257WJ02 REAR CABINET ASSEMBLY GCABBC257WJKA REAR CABINET...
  • Page 96 LC-60G9T / LC-70G9T [5] CABINET AND MECHNICAL PARTS ( LC-70G9T ) 70" LCD Panel Unit KEY Unit LCD CONTROL Unit MAIN Unit POWER/ DRIVE Unit BLUETOOTH Unit Wi-Fi Unit R/C OPC Unit ICON Unit...
  • Page 97 LC-60G9T / LC-70G9T PRICE PART PARTS CODE DESCRIPTION RANK MARK RANK [5] CABINET AND MECHNICAL PARTS ( LC-70G9T ) Rear Cabinet Ass'y CCABBC256WJ02 Rear Cabinet Not Available Terminal Label (Back) Not Available Not Available Terminal Label (Bottom) LHLDWA318WJKZ Cable Tie...
  • Page 98 LC-60G9T / LC-70G9T PRICE PART PARTS CODE DESCRIPTION RANK MARK RANK [5] CABINET AND MECHNICAL PARTS ( LC-70G9T ) R1JE695D3HB10V 70" LCD PANEL UNIT (JE695D3HB10V) XBPS830P06WS0 SCREW.X12 CANGQA061WJ44 KS EARTH ANGLE KIT...
  • Page 99 LC-60G9T / LC-70G9T [6] BACKLIGHT PARTS ( LC-60G9T ) 60 inch LCD PANEL UNIT...
  • Page 100 LC-60G9T / LC-70G9T PRICE PART PARTS CODE DESCRIPTION RANK MARK RANK [6] BACKLIGHT PARTS ( LC-60G9T ) 60 PANEL ASSEMBLY CLCDTA328WE01 SUPPORT ANGLE BOTTOM ASSEMBLY CANGKD790WJ01 P CHASSIS TOP ASSEMBLY CHLDZB965WJ02 CHLDZB966WJ02 P CHASSIS BOTTOM ASSEMBLY CHLDZB967WJ01 P CHASSIS LEFT ASSEMBLY...
  • Page 101 LC-60G9T / LC-70G9T [7] SUPPLIED ACCESSORIES ( LC-60G9T/ LC-70G9T ) Supplied accessories REMOTE CONTROL UNIT A “ s ” e z i e t t ( y r ) 2 x OPERATION MANUAL STAND UNIT 3D GLASSES The 3D glasses is supplied for certain country only.
  • Page 102 LC-60G9T / LC-70G9T PRICE PART PARTS CODE DESCRIPTION RANK MARK RANK [7] SUPPLIED ACCESSORIES ( LC-60G9T/ LC-70G9T ) REMOTE CONTROL RRMCGB040WJSA "AAA" BATTERY UBATAA011WJZZ STAND BASE ASSEMBLY CDAI-A857WJ06 CANGKD781WJ01 STAND SUPPORT ASSEMBLY CSAKHA050WE15 STAND SCREW ASSEMBLY LHLDWA318WJKZ CABLE CLAMP TINS-F850WJZZ...
  • Page 103 LC-60G9T / LC-70G9T [8] PACKING PARTS ( NOT REPLACEMENT ITEM ) ( LC-60G9T )
  • Page 104 LC-60G9T / LC-70G9T PRICE PART PARTS CODE DESCRIPTION RANK MARK RANK [8] PACKING PARTS ( NOT REPLACEMENT ITEM ) ( LC-60G9T ) PACKING CASE MAIN SPAKCH320WJZZ BOTTOM CASE SPAKCH305WJZZ HOSO PP SPAKPB596WJZZ SPAKXE086WJZZ TOP POLYFOAM SPAKXE087WJZZ BOTTOM POLYFOAM SPAKPB906WJZZ STAND BASE PP...
  • Page 105 LC-60G9T / LC-70G9T [9] PACKING PARTS ( NOT REPLACEMENT ITEM ) ( LC-70G9T )
  • Page 106 LC-60G9T / LC-70G9T PRICE PART PARTS CODE DESCRIPTION RANK MARK RANK [9] PACKING PARTS ( NOT REPLACEMENT ITEM ) ( LC-70G9T ) PACKING CASE MAIN SPAKCH309WJZZ BOTTOM POLYFOAM SPAKXE084WJZZ BOTTOM L/R POLYFORM SPAKXE085WJZZ SPAKCH299WJZZ SOKO CASE SPAKXE082WJZZ PACKING FOAM ( SIDE-L )
  • Page 107 LC-60G9T / LC-70G9T...
  • Page 108 EndPage © COPYRIGHT XXXX BYSHARP CORPORATION COPYRIGHT 2013 BY SHARP CORPORATION ALL RIGHTS RESERVED. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in © COPYRIGHT XXXX BYSHARP CORPORATION any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without prior written permission of the publisher.

This manual is also suitable for:

Lc-70g9t