Eco Mode; Using A Smartphone With The Tv; Teletext Function; Pc Compatibility Chart - Sharp LC-32LE355M Operation Manual

ECO mode

This function enables you to reduce the backlight brightness
in order to decrease the power consumption and increase
the backlight life span as shown in the following table.
Selected item
ECO 1 Reduces the backlight brightness.
Reduces the backlight brightness more than
ECO 2
"ECO 1".
ECO Off Normal setting of backlight brightness.
ECO status will be displayed on the channel information
window.

Using a Smartphone with the TV

This function enables you to connect the TV to a smartphone
that supports Mobile High-Defi nition Link (MHL) using an
MHL-compatible cable.
To connect the TV to your MHL-compatible smartphone,
be sure to use an MHL-compatible cable (commercially
available).
• You can view pictures and video on a large screen.
• You can play back music fi les.
MHL-compatible cable
NOTE
• An MHL-compatible portable device is required to use this function.
Connect the device to the INPUT 3 terminal.
• This production incorporates MHL I.
H Auto power on
When an MHL-compatible device is connected to the TV,
the TV turns on automatically.
• This function operates when "Link operation" is set to "On".
(See page 9.)
H Auto input selection
When an MHL-compatible device is connected while the TV
is on, the input mode is selected automatically.
• This function operates when "Link operation" is set to "On".
(See page 9.)
H Operation using the remote control
The remote control of the TV can be used to operate a
portable device.
• a/b/c/d , ENTER, 0 - 9, etc.
• The operations vary depending on the connected equipment and
content being viewed.
• Colour (Red/Green/Yellow/Blue) may be available to control play/
pause/fast forward/back forward function.
12
Description
INPUT 3 terminal (Rear side)

Teletext function

What is Teletext?
Teletext broadcasts pages of information and entertainment
to specially equipped television sets. News, weather reports,
sports information, stock exchange prices and programme
previews are among the many services available.
Turning on and off Teletext
1
Select a TV channel or external input source providing
the Teletext programme.
2
Press m to display the Teletext.
3
Each time you press m , the screen switches as
shown below.
NOTE
• If you select a programme with no Teletext signal,
"No Teletext available." is displayed.
• The same message displays during other modes if no Teletext
signal is available.
Button functions
Buttons
CH ( r / s ) Increase or decrease the page number.
Colour (Red/ You can select a group or block of pages
displayed in the coloured brackets at the bottom
Green/
of the screen by pressing the corresponding
Yellow/Blue)
Colour (Red/Green/Yellow/Blue) on the
remote control unit.
0 — 9 Directly select any page from 100 to 899 by
using 0 — 9.
k (Reveal To reveal hidden information such as an answer
to a quiz.
hidden for
TELETEXT)
3 (Hold)
To stop updating Teletext pages automatically
or release the hold mode.
[ (Subtitle
Display the subtitle during Teletext page.
for
• Subtitle will not be displayed when the service
TELETEXT)
does not contain subtitle information.
1 (Subpage)
Display the subpage during Teletext page.
NOTE
• Teletext can display only when it is sent by a network. Not used to
convert between languages.

PC compatibility chart

Resolution
640 g 480
VGA
800 g 600
SVGA
1024 g 768
XGA
1360 g 768
WXGA
Power Management is a registered trademark of Sun Microsystems,
Inc.
VGA, SVGA, XGA and WXGA are registered trademarks of
International Business Machines Corporation.
TELETEXT
Description
Horizontal Vertical
Frequency Frequency Standard
31.5 kHz 60 Hz
37.9 kHz 60 Hz
48.4 kHz 60 Hz
47.7 kHz 60 Hz
TELETEXT
VESA
✓
✓
✓
✓