Video Connections; Hdmi Connection - Sharp Aquos LC-70UD1X Operation Manual

Connecting external devices

Video connections

HDMI connection

Example of connectable devices
E
DVD player/recorder
E
Blu-ray player/recorder
E
Game console
The HDMI connections permit digital video and audio
transmission via a connection cable from a player/
recorder. The digital picture and sound data are
transmitted without data compression and therefore lose
none of their quality. Analogue/digital conversion is no
longer necessary in the connected devices, which also
would result in quality losses.

3.5 mm stereo minijack cable (commercially available)

DVI/HDMI cable (commercially available)

HDMI-certified cable (commercially available)
(DC 5V 900mA)
DVI/HDMI conversion
Using a DVI/HDMI cable, the digital video signals of
a DVD can also be played via the compatible HDMI
connection. The sound must be fed in additionally.
• When connecting a DVI/HDMI cable to the HDMI terminal, the
image may not come in clearly.
• Both HDMI and DVI use the same HDCP copy protection
method.
E
When using the HDMI 2 terminal
You must set the audio signal input source depending
on the type of HDMI cable connected (refer to page 48 for
details).
HDMI-certified cable
1
Press b to select "HDMI2" from the
"INPUT" menu, and then press ?.
2
Go to "HOME" > "TV Menu" > "Setup" >
"Option" > "Terminal setting" > "Audio select"
> select "HDMI".
DVI/HDMI cable
1
Press b to select "HDMI2" from the
"INPUT" menu, and then press
2
Go to "HOME" > "TV Menu" > "Setup" >
"Option" > "Terminal setting" > "Audio select"
> select "HDMI + Analogue".
NOTE
• If a connected HDMI device is AQUOS LINK
compatible, you can take advantage of versatile
functions (Pages 32–35).
• Video noise may occur depending on the type of HDMI cable
used. Make sure to use a certified HDMI cable.
• When playing the HDMI image, the best possible format for
the picture will be detected and set automatically.
• An ARC (Audio Return Channel) compatible audio receiver
must be connected to the HDMI 1 terminal with an ARC-
compatible cable.
• All HDMI terminals support 3D image signals.
Supported video signal
576i, 576p, 480i, 480p, 1080i, 720p, 1080p,
4K (3,840 x 2,160)
See page 69 for PC signal compatibility.
NOTE
• When connecting 4K (3,840 x 2,160 (Ultra HD) 30Hz, 25Hz,
24Hz) equipment to the TV, use the HDMI 1,2,3,4 terminal
and use HDMI cable of High speed type.
Supported audio signal
Linear PCM, sampling rate 32/44.1/48kHz.
Dolby Digital, DTS.
? .
29