Table of Contents
Advertisement
8.
Push the retaining lever (b) towards the rear of the printer to lock the fuser in place.
Finally, close the top cover and press down firmly at both sides so that the cover latches
closed.
9.
Switch the printer ON.
C
LED
LEANING THE
Clean the LED head when printing does not come out clearly, has white lines or when text
is blurred.
1.
Switch off the printer and open the top cover.
2.
Gently wipe the LED head surface with a soft tissue.
Do not use methyl alcohol or other solvents on the LED head as
damage to the lens surface will occur.
3.
Close the top cover.
b
HEAD
CAUTION!
Replacing consumable items > 62
Advertisement
Table of Contents
