Locations And Function Of The Remote Control - Beat 525 Owner's Manual

LOCATIONS AND FUNCTION OF THE REMOTE CONTROL

1.
Press it to turn on the unit. When the
unit is on, press it to turn the unit off.
2. MODE
When the unit is on, press it to select
the different mode, such as RADIO,
DVD, USB, SD mode.
3. BND/SYS
In radio mode, press it shortly to
select the desired band, such as FM1,
FM2, FM3, MW1 and MW2.
In DVD mode, press to change the TV
system between AUTO, NSTC and
PAL.
4. / , /
In case of menu mode, the buttons
served as cursor buttons to select
item left/right, up/down.
5. ENTER
Press to confirm your selection.
6.
In DVD/USB/SD mode, press it once
to pre-stop play, press it twice to stop
the play and return to the logo.
7. AMS/RPT
In radio mode, press to activate auto
seek/preset store function.
In media play mode, press to switch
the repeat mode of programs.
8. ST/PROG
In media play mode, press to enter
into program mode to play the track in
your desired sequence.
In radio mode press to set the
reception between mono mode or
stereo mode.
9. LOC/RDM
In radio mode, press it to select
between local and distant stations.
In media play mode, press to play all
tracks in random order.
10. VOL+/VOL-
Press to increase/decrease the
volume level.
11. PBC
It can be used to change between
PBC ON and PBC OFF on the VCD
disc.
For DVD disc, press to enter into the
menu interface.
12. OSD
In media play mode, press to display
OSD (the on-screen display)
information.
13. 0-9
Numeric buttons.
14.
Press to play/pause the playback.
15.
Press to mute the sound, press it
again to resume the sound.
16. Title
Press to display the title menu of the
DVD disc.
17. Sub-T
Press to display the subtitle
information of the DVD disc.
18. Setup
In media play mode, press to enter
into the DVD setup menu.
19. Angle
Press to change the view angle on
multi-angle DVD disc.
20. Slow
For some discs, press to start slow
forward function.
13