Aux In Operation - Beat 525 Owner's Manual

OPERATION
◆
Mono/Stereo
Press ST button on remote control to
select mono or stereo mode. You can
sometimes improve reception of
distant stations by selecting mono
operation.
◆ RDS (RADIO DATA SYSTEM)
OPERATION
1) Setting AF function
In FM mode, Press and hold TA/AF
button on the front panel to switch
on or off AF function. In AF on
mode, "AF" will flash on the screen.
2) In FM mode, shortly press TA/AF
button on the front panel to switch
TA on or off. When TA on, the unit
will search Traffic Announcement
automatically.
When received a Traffic
Announcement station, the unit will
change to the Traffic Announcement
station automatically. Shortly press
TA/AF again to exit TA mode.
3) Using PTY to Select Program
Press PTY button on the front panel
to start the station search.
Use VOL+/- buttons on the remote
control or volume knob on the front
panel to change the items, when
you choose the desired items.
When PTY is selected, the radio
starts to search corresponding PTY
information, and
corresponding PTY information is
detected.
If corresponding PTY information is
not existed
engaging is automatically exit to
normal mode.
stops if the
any more, PTY
Notes:
AF: Alternative Frequencies
Frequency list of broadcasting
stations transmitting the same
program
TA: Traffic Announcement
Identification
Identification data showing traffic
information is being transmitted
or not
PTY: Program Type Code
Contents of programs such as
news, light music, sports etc.
TP: Traffic Program Identification
Identification
information-broadcasting station

AUX IN OPERATION

On the front panel of the unit, there is an
AUX IN jack. When you connected the
audio/video device from the jack, press
MODE button on the remote control or
on the front panel to select AUX
MODE
IN mode.
23
data for traffic