Beat 525 Owner's Manual page 20

OPERATION
LANGUAGE SETUP
OSD LANGUAGE
AUDIO LANG
SUBTITLE LANG
MENU LANG
* You can change the OSD
LANGUAGE, AUDIO LANGUAGE,
SUBTITLE LANGUAGE, MENU
LANGUAGE among different
languages.
The language options are different
depending on your country or region.
3) AUDIO SETUP
When you open the AUDIO menu,
you will see the following picture:
AUDIO SETUP
KEY
* KEY: Change the tone within a certain
range.
4) VIDEO SETUP
When you open the VIDEO menu,
you will see the following picture:
VIDEO SETUP
BRIGHTNESS
CONTRAST
HUE
SATURATION
SHARPNESS
You can adjust the value of the
brightness, contrast, hue, saturation
and sharpness.
5) SPEAKER SETUP
When you open the SPEAKER
menu, you will see the following
picture:
SPEAKER SETUP
DOWNMIX
* DOWNMIX: to set the DOWNMIX
modes of LT/RT, STEREO and
VSS.
6) DIGITAL SETUP
When you open the DIGITAL menu,
you will see the following picture:
DIGITAL SETUP
OP MODE
DYNAMIC RANGE
DUAL MONO
* OP MODE: to set the operating
modes for Dolby Digital decoder,
there are LINE OUT and RF
REMOD to be selected.
* DYNAMIC RANGE: you can
adjust the dynamic range between
OFF, 1/8, 2/8. 3/8, 1/2, 5/8, 3/4,
7/8, full.
* DUAL MONO: there are STEREO,
MONO L, MONO R and MIX
MONO to be selected.
Note: The displayed setting information
is different according to different version.
◆ On-screen Display Function
Press the OSD button on the front
panel or on the remote control during
playback to display the console
information of the current disc on the
screen.
For an example (when playing a DVD
disc):
Once you press OSD button you will
see the information as the following
order.
20