How To Connect Electricity - Monogram ZIDI240 Owner's Manual

Double-drawer built-in refrigerator
Table of Contents

Advertisement

HOW TO CONNECT ELECTRICITY

Do not, under any circumstances, cut or
remove the third (ground) prong from
the power cord. For personal safety, this
appliance must be properly grounded.
The power cord of this appliance is
equipped with a 3-prong (grounding)
plug which mates with a standard 3-prong
(grounding) wall outlet to minimize the
possibility of electric shock hazard from
this appliance.
Have the wall outlet and circuit checked
by a qualified electrician to make sure
the outlet is properly grounded.
Where a standard 2-prong wall outlet
is encountered, it is your personal
responsibility and obligation to have
it replaced with a properly grounded
3-prong wall outlet.
Use of a GFI (Ground Fault Interrupter)
is not recommended for the double-
drawer refrigerator.
The appliance should always be plugged
into its own individual electrical outlet
which has a voltage rating that matches
the rating plate. This provides the best
performance and also prevents overloading
house wiring circuits which could cause a
fire hazard from overheated wires.
6
IMPORTANT SAFETY INSTRUCTIONS
SAVE THESE INSTRUCTIONS
DO NOT USE AN
ADAPTER PLUG TO
CONNECT THE
DOUBLE-DRAWER
REFRIGERATOR TO
A 2-PRONG OUTLET.
DO NOT USE AN
EXTENSION CORD
WITH THIS APPLIANCE.
Never unplug an appliance by pulling on
the power cord. Always grip the plug firmly
and pull straight out from the outlet.
Repair or replace immediately all power
cords that have become frayed or
otherwise damaged. Do not use a cord
that shows cracks or abrasion damage
along its length or at either end.
When moving the appliance, be careful
not to roll over or damage the power cord.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Zids240

Table of Contents