Husqvarna 230 ACX/220 AC Operator's Manual page 21

Installation and connecting the charging
station
1. Position the charging station in a suitable spot.
2. Secure the charging station to the ground using
the supplied nails.
IMPORTANT INFORMATION
It is not permitted to make new holes in the
plate. Only the existing holes may be used to
secure the plate to the ground.
3. Connect the low voltage cable to the charging
station.
Only use original cable and transformer.
4. Connect the low voltage cable to the transformer.
The connectors may be slightly difficult to
connect, as they are moisture-proof.
5. Connect the transformer's power cord to a 120V
wall socket. It is preferable to use an earth-fault
breaker as recommended.
IMPORTANT INFORMATION
Do not tread or walk on the charging station
plate.
22 - English
3. INSTALLATION
3012-549
3012-263
3012-262
3012-533