Husqvarna 230 ACX/220 AC Operator's Manual page 13

2. PRESENTATION
The STOP button on the top of Automower is mainly
used to stop the mower when it's running. When the
STOP button is pressed a cover opens, behind which
there is a control panel. The STOP button remains
depressed until the cover is closed again. This acts
as start inhibitor.
3012-388
The control panel on the top of Automower is where
you manage all the mower settings. The main switch
is also located on the control panel. Open the control
panel cover by pressing down the STOP button.
When the main switch is turned ON for the first time, a
start-up sequence begins which includes: selection of
the language, time format, date format and four digit
PIN code, plus setting of the time and date, see
page 33.
The selected PIN code must then be entered each
3012-700
time the main switch is moved to the ON position.
This theft-prevention function is called Time lock
(4-1-2) and Automower has this function activated as a
default setting. The function also means that the
mower stops mowing after a set number of days and
will not continue until the correct PIN code has been
entered. The function can be deactivated or changed
as required. For more information about Time lock
(4-1-2), see page 59.
Automower can enter a sleep mode to save power.
The display on the control panel is then completely
dimmed.
The sleep mode is activated 25 minutes after the
STOP button has been pressed and then not reset to
the operating mode. Automower is then activated by
switching the main switch off and on.
The sleep mode can also be activated in the event of
a fault occurring during mowing or charging and
which is not rectified within 25 minutes. Automower is
3012-400
then activated by pressing the STOP button.
14 - English