Release Lever - Husqvarna Rider 15V2 AWD Operator's Manual

Release lever

The release control must be pulled out in order for the
machine to be moved when the engine is shutoff.
Pull the controls to the end positions, do not use an
intermediate position.
Release lever Rider 15V2 AWD
Rider 15V2 AWD has one control for the front axle and one
control for the rear axle.
• Clutch control, rear axle
- Control drawn out, drive system disengaged.
- Control depressed, drive system engaged.
• Clutch control, front axle
The control is positioned on the inside of the left front
wheel.
- Rear control (pulled out), drive system disengaged.
- Front control (pushed in), drive system engaged.
18 –
English
Driving
Release lever Rider 15V2
• Pull out the control to disengage the drive system.
• Push in the control to engage to the drive system.