TMC TI7NBF User Manual page 50

Chapter 6 BIOS and System Setup
ACPI function
ACPI stands for Advanced Configuration Power Interface. The default
setting of this field Enabled.
Power Management
This field allows you to select the type of power saving management
modes. There are fours selections for Power Management.
Min. Power Saving
Max. Power Saving
User Define
NOTE: In order to enable the CPU overheat protection feature, the
Power Management field should not be set to Disabled.
PM Control by APM
This field allows you to use the Advanced Power Management device to
enhance the Max. Power Saving mode and stop the CPU's internal clock. If
the Max. Power Saving is not enabled, this will be preset to NO.
Video Off Method
This field defines the Video Off features. There are three options.
V/H SYNC + Blank Default setting, blank the screen and turn off
vertical and horizontal scanning.
DPMS Allows the BIOS to control the video display card if it
supports the DPMS feature.
Blank Screen This option only writes blanks to the video buffer.
Video Off After
As the system moves from lesser to greater power-saving modes, select
the mode in which you want the monitor to blank.
Video Off Option
This field determines the state at which video enters into when turned off.
By default, this field is set to Suspend -> Off.
Modem Use IRQ
This field names the interrupt request (IRQ) line assigned to the modem
(if any) on your system. Activity of the selected IRQ always awakens the
system. By default, the IRQ is set to 3.
44 TI7NBF Socket 370 ATX Motherboard User's Manual
Minimum power management
Maximum power management.
Each of the ranges are from 1 min. to
1hr. Except for HDD Power Down
which ranges from 1 min. to 15 min.
(Default)