Cutting Unit; Lift Lever For Cutting Unit; Lever For Adjustment Of Cutting Height - Husqvarna 11/13 H Operator's Manual

PRESENTATION

Cutting unit

Rider 11 and Rider 13 H have a cutting unit with
rear ejection, i.e. the grass cuttings are thrown out
behind the cutting unit.

Lift lever for cutting unit

The lift lever is used to set the cutting unit in trans-
port or cutting position.
If the lever is pulled back the unit will lift up and the
blades stop rotating (transport position).
If the lock button is pressed and the lever is moved
forward the unit will lower down and the blades
begin rotating (cutting position).
The lever can also be used to temporarily regulate
the cutting height, e.g. for a small mound in the lawn.
Lifting of the cutting unit (transport position)
Lowering of the cutting unit (cutting position)

Lever for adjustment of cutting height

With this lever the cutting height can be adjusted to
9 different positions (40–90 mm).
The drawing shows a Rider 13 H.
12
– English