Variable Loading Floor In The Boot - Skoda Roomster Owner's Manual

Installing and removing the net partition behind the rear seats is carried out anal-
ogously as behind the rear seats. Use the lower fixing eyes on the carrier rails in
order to attach the carabines. To enlarge the boot, the rear seats can be removed.
Installing and removing the net partition behind the rear seats with variable load-
ing floor » page 55 is carried out analogously as behind the rear seats without
variable loading floor. To attach the carabines, use the lower eyes at the fixing
wedges on the front part of the variable loading floor.
The opening » Fig. 48 in the net partition is designed to feed through the
D
three-point seat belt » page 107, Seat belt for the rear middle seat.

Variable loading floor in the boot

Introductory information
The variable loading floor makes handling of bulky items of luggage easier.
CAUTION
The maximum permissible load of the variable loading floor is 75 kg.
Note
The room under the variable loading floor can be used to stow objects.
Dividing the boot with variable loading floor
›
Lift up the part with the holder and secure it by sliding it into the grooves
marked with the arrows » Fig. 49.
Fig. 49
Dividing the boot
Removing/installing the variable loading floor
Ð
Fig. 50 Fold up variable loading floor/remove
Removing
›
Unhook the loops » Fig. 50
A
›
Unlock the variable loading floor by turning the locking bolts
around 180°.
›
Fold up the variable loading floor by moving it in the direction of the arrow
›
Fold up the variable loading floor in the direction of the arrow
by pulling in the direction of the arrow
Install
›
Fold up the variable loading floor and place it on the carrier rails.
›
Ð
Fold out the variable loading floor.
›
Lock the variable loading floor by turning the locking bolts
right by around 180°.
›
Secure the loops A of the elastic partition to the fixing points.
WARNING
Ensure that the carrier rails and variable loading floor are correctly fastened
when installing the variable loading floor. If this is not the case, there is a risk
of injury for the occupants.
Ð
of the elastic partition out of the fixing points.
to the left by
B
and remove
1
.
2
» Fig. 50
B
Seats and Stowage
.
C
to the
Ð
55