Air Outlet Vents; Heating - Skoda Roomster Owner's Manual

If you cannot rectify the functional fault yourself, or the cooling capacity decrea-
ses, the cooling system must be switched off. Seek help from a ŠKODA specialist
garage.

Air outlet vents

Fig. 74 Air outlet vents
Open the air outlet vents 3 and 4
›
Turn the vertical wheel (air vents 3)
nozzles 4) into position .
Close air outlet vents 3 and 4
›
Turn the vertical wheel (air vents 3)
nozzles 4) into position 0.
Change air flow of air outlet vents 3 and 4
›
In order to change the strength of the air flow, swivel the horizontal lamellas
with the aid of the moveable adjuster
›
In order to change the lateral direction of the air flow, swivel the vertical lamel-
las with the aid of the moveable adjuster.
Set the air supply to the individual vents with the air distribution control
» Fig. 75 on page 68. Air outlet vents 3
C
closed individually.
Warmed, unwarmed or cooled air will flow out of the air outlet vents according to
the setting of the regulator of the heating or the air conditioning system and the
atmospheric conditions.
68
Using the system
» Fig. 74 or the horizontal wheel (air outlet
» Fig. 74 or the horizontal wheel (air outlet
» Fig. 74.
» Fig. 74 and 4 can also be opened or

Heating

Ð
Using the system
Fig. 75 Heating: Control elements
Setting temperature
›
Turn the control dial » Fig. 75
A
›
Turn the control dial to the left to decrease the temperature.
A
Controlling blower
›
Turn the blower switch » Fig. 75
B
the blower on.
›
Turn the blower switch into position 0 to switch the blower off.
B
›
If you wish to shut off the fresh air supply, use the button
section Recirculated air mode.
Regulating the air distribution
›
The direction of the inlet air flow is controlled with air distribution regulator
» Fig. 75 » page 68.
C
All controls apart from the blower switch
intermediate position.
The blower should always be on to prevent the windows from misting up.
Ð
to the right to increase the temperature.
into one of the positions, 1 to 4, to switch
» page 70,
1
» Fig. 75 can be set to any desired
B
in
£