Connecting External Equipment - Toshiba Regza Z3030 Series Manual

Connecting external equipment

Before connecting any external equipment, turn off all main power switches. If there is no switch
remove the mains plug from the wall socket.
SCART 2 (EXT2)
SCART 1 (EXT1)
decoder*
media recorder
Aerial cables:
Connect the aerial to the socket on the rear of the television.
If you use a decoder* and/or a media recorder it is essential
that the aerial cable is connected through the decoder
and/or through the media recorder to the television.
SCART leads:
Connect the video recorder IN/OUT socket to the television.
Connect the decoder TV socket to the television. Connect
the media recorder SAT socket to the decoder MEDIA REC.
socket.
Before running Auto tuning put your decoder and media
recorder to Standby.
The phono sockets alongside the COMPONENT VIDEO
INPUT sockets will accept L and R audio signals.
The Digital Audio Output socket enables the connection of a
suitable surround sound system. NOTE: this output is
always active.
In addition there is a fixed external audio ouput which
enables the connection of a suitable Hi-Fi unit. Make sure
the Speaker option in the Sound menu is set to Off.
HDMI™ (High-Definition Multimedia Interface) is for use with
a DVD, decoder or electrical equipment with digital audio
and video output.
REGZA-LINK will only work through HDMI when using other
Toshiba equipment with REGZA-LINK capability.
COMPONENT VIDEO (EXT3)
MEDIA REC.
TV
IN/OUT SAT
7
FIXING STRAP
COMMON INTERFACE
DIGITAL AUDIO
OUTPUT
The Common Interface is for a
(DTV MODE ONLY)
Conditional Access Module (CAM).
Contact a service provider.
This television supports HDMI (Deep Color™) when applied
through an HDMI input.
NOTE: It is recommended that an HDMI cable with the
HDMI logo ( ) is used. When connecting other
equipment to this television if the connection is capable of
1080p and/or supports Deep Color™ a Category 2 cable
will be required. Conventional HDMI/DVI cable may not
work properly with this mode. It is recommended that DVI
cable or DVI/HDMI adapter with cable is less than 2m long.
PLEASE NOTE: Although this television is able to connect
to HDMI equipment it is possible that some equipment may
not operate correctly.
A wide variety of external equipment can be
connected to the back of the television, therefore the
relevant owners manuals for all additional
equipment must be referred to.
We recommend SCART 1 for a decoder and SCART 2 for a
media recorder. If connecting S-VIDEO equipment, set the
INPUT for EXT2. See page 37.
If the television automatically switches over to monitor
external equipment, return to normal television by pressing
the desired programme position button. To recall external
equipment, press B to select between DTV, EXT1, EXT2,
EXT3C, HDMI1, HDMI2, HDMI3, PC or ATV.
HDMI, the HDMI logo, High-Definition Multimedia Interface and Deep
Color are trademarks or registered trademarks of HDMI Licensing, LLC.
CABLE HOLDER
HDMI™ INPUT
SOCKETS