Connecting External Equipment - Toshiba PW33 Series Owner's Manual

Connecting external equipment

Before connecting any external equipment, turn off all main power switches.
SCART 3
(EXT 3)
SCART 1
(EXT 1)
SCART 2
(EXT 2)
WE RECOMMEND THAT YOU USE SCART LEADS IN
ADDITION TO AERIAL CABLES WHEREVER POSSIBLE
Aerial cables:
Connect the aerial to the socket on the rear of the
television. If you use a decoder* and/or a video
recorder it is essential that the aerial cable is connected
through the decoder and/or through the video
recorder to the television.
Scart leads:
Connect the video recorder IN/OUT socket to the TV.
Connect the decoder TV socket to the TV. Connect the
video recorder SAT socket to the decoder VCR socket.
Before running Auto tuning put your decoder and
video recorder to Standby.
The phono sockets alongside the COMPONENT VIDEO
INPUT sockets will accept L and R audio signals.
decoder*
IN
TV VCR
OUT
video recorder
IN/OUT SAT
6
the back of your TV
COMPONENT VIDEO INPUT
(EXT 4)
IN
OUT
A wide variety of external equipment can be
connected to the back of the TV, therefore the
relevant owners manuals for all additional
equipment must be referred to.
We recommend Scart 1 for a decoder, Scart 2 for a
VCR and Scart 3 for additional equipment (games
console etc.).
If connecting S-VIDEO equipment, set the INPUT for
EXT2 or EXT3. See page 15.
If the TV automatically switches over to monitor
external equipment, return to normal TV by pressing
the desired programme position button.
To recall external equipment, press
between EXT1, EXT2, EXT3 or EXT4.
B to select