WARRANTY OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. Toshiba shall not be liable for any damages, losses, expenses or costs, if any, incurred in connection with or as a result of use of any information or data provided herein.
IMPORTANT NOTICE User's Guide Contents: Install Autodesk DWF Viewer Internet Explorer Settings Operating Environment Functions Provided on Each Drawing Page Using with Network Install Autodesk DWF Viewer Autodesk DWF Viewer is necessary to view drawings and to activate the functions of this system. Please download and install.
Page 4
2. Internet Explorer setting [Tools] - [Internet Options] for Internet Explorer 7...
Operating Environment : Pentium III or higher recommended Monitor : 1024 x 768 or higher resolution recommended Mouse : A mouse with wheel recommended : Microsoft Windows 2000 SP4 / XP / Vista Browser Microsoft Internet Explorer 6.0 / 7.0 Drawing viewer : Autodesk DWF Viewer 6.0 / 7.0 * Use the software following respective license terms and conditions.
Page 7
Layer Display Changing Function When any of the color buttons on the toolbar is clicked, it can be selected to display desired layer in its color or not to display each layer. This allows you to see the pattern layer only by setting other layers to "non- display".
Page 8
4. Move the ZEUS Engine Program of step 2 to the folder created at step 3 in the Server. 5. Detach the ZEUS Service Manual Ver.2 to the folder created at step 3 in the Server. 6. Unzip the ZEUS Service Manual Ver.2 within the folder in the Server. Example of folder Procedure of File-Path The zeusFPch is the exclusive program to exchange the file-path names written in both source files of ZEUS...
Page 9
1. Whenever changing the file-path of both ZEUS Engine Program and ZEUS Service Manual to use with network, pay the attention to set the "Exchange to" column that should have a proper relation between ZEUS Engine Program and ZEUS Service Manual with referring the following. Run the zeusFPch and set "Exchange to"...
Page 10
2. Run the zeusFPch to change the path in the ZEUS Engine Program Ver.2. 3. Set ZEUS Engine Program in the created folder in the server to the "Target Folder", and then press "START". (This procedure is one time only)
Page 11
4. Run the ZeusFPch to change the path in the ZEUS Service Manual Ver2. 5. Set unzipped ZEUS Service Manual in the created folder in the server to the "Target Folder", and then press "START". (This procedure is required whenever placing service manual.) Confirmation Confirm that service manual on the server can be operated normally by client PC.
Page 12
Through WEB, ver. 6.5 has been released but with it, the linking function in this manual may not work properly. If ver. 6.5 has been installed, uninstall it and reinstall ver. 6.0. To get ver. 6.0, click the icon, or contact to the nearest Toshiba Service Centre for further assistance. Freezing windows opened (Cannot close the open windows) This may happen occasionally.
Page 13
Continue to use by operating the windows. Precaution when opening the diagrams While opening the diagrams, the menu in the left frame changes its color to GRAY. This is an indication that the viewer is processing. With this condition, the menu indication color may stick to the GRAY color or Windows may freeze if clicking other menu.
Corporation recognizes environmental protection as a key management tasks, and is doing its utmost to enhance and improve the quality and scope of its environmental activities. In line with this, Toshiba proactively promotes Green Procurement, and seeks to purchase and use products, parts and materials that have low environmental impacts.
LEAD-FREE SOLDER This product is manufactured using lead-free solder as a part of a movement within the consumer products industry at large to be environmentally responsible. Lead-free solder must be used in the servicing and repair of this product. WARNING: This product is manufactured using lead free solder.
SAFETY INSTRUCTION WARNING: BEFORE SERVICING THIS CHASSIS, READ THE "SAFETY PRECAUTION" AND "PRODUCT SAFETY NOTICE" INSTRUCTIONS BELOW. Safety Precaution WARNING: SERVICING SHOULD NOT BE ATTEMPTED BY ANYONE UNFAMILIAR WITH THE NECESSARY PRECAUTIONS ON THIS RECEIVER. THE FOLLOWING ARE THE NECESSARY PRECAUTIONS TO BE OBSERVED BEFORE SERVICING THIS CHASSIS.
Page 17
inflammability, voltage resistance, etc. therefore, use only replacement parts that have these same characteristics. Use only the specified parts when the mark is indicated in the circuit diagram or parts list. 7. Parts mounting and routing dressing of wirings should be the same as that used originally.
Page 18
Resistance values in orms ( ). V: Voltmeter or oscilloscope (r.m.s. or peak reading) Input resistance : Input capacitance : 200 pF Frequency range : 15 Hz to 1 MHz and d.c. respectively Note: Appropriate measures should be taken to obtain the correct value in case of non sinusoidal waveforms.
Product Safety Notice Many electrical and mechanical parts in this chassis have special safety-related characteristics. These characteristics are often passed unnoticed by a visual inspection and the protection afforded by them cannot necessarily be obtained by using replacement components rated for higher voltage, wattage, etc. Replacement parts which have these special safety characteristics are identified in this manual and its supplements;...
SAFETY INSTRUCTION Handling the LCD Module Safety Precaution In the event that the screen is damaged or the liquid crystal (fluid) leaks, do not breathe in or drink this fluid. Also, never touch this fluid. Such actions could cause toxicity or skin irritation. If this fluid should enter the mouth, rinse the mouth thoroughly with water.
Page 21
3. If the panel surface becomes soiled, wipe with cotton or a soft cloth. If this does not remove the soiling, breathe on the surface and then wipe again. If the panel surface is extremely solied, use a CRT cleaner as a cleaner. Wipe off the panel surface by drop the cleaner on the cloth.
Page 22
6. CMOS-LSI circuitry is used in the LCD module, so avoid damage due to static electricity. When handling the module, use a wrist ground or anchor ground. 7. Do not expose the LCD module to direct sunlight or strong ultraviolet rays for an extended period of time.
Page 23
10. When transporting the LCD module, do not use packing containing epoxy resin (amine) or silicon resin (alcohol or oxim). The gas generated by these materials can cause loss of polarity.
Page 24
CN001 14P/2.0mm 36P AND 40P/1.25mm CN401 CN701...
SCHEMATIC DIAGRAM Precaution WARNING: BEFORE SERVICING THIS CHASSIS, READ THE "X-RAY RADIATION PRECAUTION" FOR DIRECT VIEW CTV ONLY, "SAFETY PRECAUTION" AND "PRODUCT SAFETY NOTICE" OF THIS MANUAL. CAUTION: The international hazard symbols " " in the schematic diagram and the parts list designate components which have special characteristics important for safety and should be replaced only with types identical to those in the original circuit or specified in the parts list.
Page 29
= Electrolytic capacitor = Mylar capacitor 3. The parts indicated with " " have special characteristics, and should be replaced with identical parts only. 4. Voltages read with DIGITAL MULTI-METER from point indicated to chassis ground, using a color bar signal with all controls at normal, line voltage at nominal AC volts. 5.
FIRMWARE UPDATING APP code download sequence (using USB flash disk) 1. Copy APP code upgrade.pkg to USB flash disk (root folder). Figure 1 USB flash disk 2. Plug USB flash disk into TV. Figure 2 Plug USB Flash Disk into TV 3.
Page 62
Figure 4 Update firmware 2 4. Reboot (AC Off/On) TV to download APP software automatically. 5. Unplug USB flash disk and reboot TV again. Figure 5 Unplug USB flash disk 6. Press "MENU" button, then press "1001" on the remote control to check firmware version.
Page 63
TECHNICAL BULLETIN File Name Title issuing date...
PARTS LIST Precaution WARNING: BEFORE SERVICING THIS CHASSIS, READ THE "SAFETY PRECAUTION" "PRODUCT SAFETY NOTICE". CAUTION: The international hazard symbols " " in the schematic diagram and the parts list designate components which have special characteristics important for safety and should be replaced only with types identical to those in the original circuit or specified in the parts list.
Page 66
: Fusible Resistor All CD and PF capacitors are ±5 %, 50 V and all resistor, ±5 %, 1/6 W unless otherwise noted.
Page 67
PARTS LIST ↓Select Block : Search 1 / 1 Jump Location : Page : Jump Search Parts No. :...
Page 68
Block : Block Location Parts No. Description Electric Parts E200 75022347 PC BOARD ASSY, MAIN WITH FW, 32SL738G, CBPFA4ABAA Electric Parts E250 75022287 PC BOARD ASSY, POWER, 32SL700A, ADTVA2413AAA Electric Parts E260 75022252 PC BOARD ASSY, KEY, 22SL700A, KEPFAAA5 Electric Parts...
Page 69
Parts No. : Block Location Parts No. Description Electric Parts E200 75022347 PC BOARD ASSY, MAIN WITH FW, 32SL738G, CBPFA4ABAA Electric Parts E250 75022287 PC BOARD ASSY, POWER, 32SL700A, ADTVA2413AAA Electric Parts E260 75022252 PC BOARD ASSY, KEY, 22SL700A, KEPFAAA5...
Page 70
PARTS LIST Miscellaneous Block : Search 1 / 1 Jump Location : Page : Jump Search Parts No. : Block Location Parts No. Description Miscellaneous B001A 75021142 LCD PANEL, LC320EXN-SCA2 Miscellaneous H001 75021699 TUNER PAL+SECAM ENV57S01D8RF_TPV_SKD, ENV57S01D8RF_TPV_SKD...
Page 71
PARTS LIST Accessory Block : Search 1 / 1 Jump Location : Page : Jump Search Parts No. : Block Location Parts No. Description Accessory E400 75014827 REMOCON HAND UNIT, CT-90326 Accessory E410 75022327 DFU ASSY, 32SL738B, 705TZA4177A Accessory E415 75022336 BASE SCREW ASSY, 705GZACS022...