Husqvarna AR19 Operator's Manual page 22

Operating Instructions for Model TA36
5. Tighten the 1/2" bolt and 3/8" bolt securely.
The 3/8" bolt will require the use of a 9/16" deep-
well socket wrench to tighten.
7. Insert four 3/8" X 1" bolts with four washers
placed on outside of frame, and tighten securely
with 3/8" lock nuts, using socket wrench.
9. Install the two 5" plastic tip wheels using the
1/2" bolts
6. Install tow bar by sliding bracket into frame
and aligning the holes.
8. Test operation of jack lift assembly by raising
transport wheels to the highest position prior to
tipping aerator into operating position. Lower
transport wheels fully before tipping aerator.
10. Tighten the tip wheels securely. For added
weight, fill the optional containers with sand or
water. Up to six optional weight containers may
22
be carried in the bed of the aerator.