ASSEMBLY Congratulations! You have just purchased the Check to see that all bolts, washers and Husqvarna Towable Aerator - a precision-engi- nuts are included in the plastic bag. Check neered product designed to provide maximum for any signs of damage that may have oc- aeration performance and flexibility.
ASSEMBLY Align jack lift assembly hole “B” with clear- ance holes in frame and attach jack assem- bly to bracket on axle using 3/8” x 1 1/2” bolt and 3/8” washers and lock nut. See TIE BAR Figure 4. FIGURE 6 Attach the tie bars to the aerator bed and to the tow bar as seen in Figure 6.
ASSEMBLY CAUTION! The wheels should be fully extended or fully retracted. NEVER operate with wheels partially retracted, dam- age to the jack could result. Add a small amount of oil to the lift jack. See Figure 8. Oil should be added after every 25 hours of operation and after wash- ing unit.
OPERATION When replacing worn or damaged tines, use included washers and torque to 15 ft./lbs. Weights may be added into pan to increase depth of ground pen- etration up to the limits shown in the specification section. Se- cure weights into the pan if used on rough ground or on angled surface.