Signaling Introduction; Hdc1200 - Hytera DMR Owner's Manual

Signaling Introduction

The radio supports the following signaling. You can ask your dealer
to make appropriate settings on your radio. For detailed informa-
tion, please contact your dealer.

HDC1200

The HDC1200 signaling is compatible with the MDC1200 signaling,
and realizes functions such as PTT ID (Encoding & Decoding),
Emergency (Encoding & Decoding) and Selective Call (Encoding
& Decoding).
Encoding:
1. Hold down the PTT key during normal voice communication to
send PTT ID.
2. Go to the menu "Contact List" and select a required contact.
Then hold down the PTT key to send a selective call (Private
Call/Group Call/All Call).
For encoding, the radio will provide the following indications:
 PTT ID/Selective Call: Your dealer can program whether the
radio sounds side tone during encoding or sounds beeps after
encoding.
 Selective Call: During encoding, the LED glows red, and the
LCD displays the appropriate call icon (Private Call:
; Group Call: ; All Call:
glows orange.
Decoding:
For decoding, the radio provides the following indications:
24
).After encoding, the LED
 PTT ID: After decoding, the LCD displays the icon
or alias of the transmitting party.
 Selective Call: After decoding, the radio provides the following
indications:
Alert:The radio will sound default alert.
LED:The LED glows green.
LCD:If your dealer enables the feature "Display Decode ID", the
radio will display the appropriate call icon (Private Call:
Group Call: ; All Call:
party (ID of the transmitting party will be displayed if it is not in the
contact list). If your dealer does not enable the feature "Display
Decode ID", the radio will display the appropriate call icon only.
and ID
) and alias of the transmitting
;