Talk Around; Monitor; Squelch Off; Emergency - Hytera DMR Owner's Manual

Functions and Operations

Talk Around

You can continue to communicate in DM mode by pressing the
programmed Talk Around key, when your repeater malfunctions,
or when your radio is out of the repeater's range but within talking
range of other radios.
Operation:
Press the programmed Talk Around key to switch between DM
mode and RM mode.

Monitor

To adjust match conditions for signal receiving, you can enable the
feature "Monitor".
Operation:
 Press the programmed Monitor key to enable the feature, and
the radio displays icon
key again.
 Hold down the programmed Monitor Momentary key to en-
able the feature, and the radio displays the icon
the feature, release this key.

Squelch Off

If the feature "Squelch Off" is enabled, the speaker will keep
unmuted no matter whether carrier is present.
Operation:
 Press the programmed Squelch Off key to enable the feature.
Then the radio displays the icon
18
. To disable the feature, press this
. To disable
and sounds background
noise. To disable the feature, press this key again.
 Hold down the programmed Squelch Off Momentary key to
enable the feature. Then the radio displays the icon
sounds background noise. To disable the feature, release this
key.

Emergency

In case of an emergency, you can use the feature to ask for help
from your companion or control center. The Emergency process
has the highest priority. You can make emergency operation even
when your radio is transmitting or receiving.
To enable the feature on a channel, an emergency system must be
assigned to the channel via the programming software. In addition,
the Emergency type, Emergency ID type and Emergency mode
are settable via the programming software.
Emergency Type
For each Emergency mode, there are four Emergency types
available. You can select one of them via your dealer:
and