Part Name; Control Names; Function - NEC MULTISYNC LCD1800TM User Manual

2
2

PART NAME

2.1

Control Names

See Figures 3 and 4 for the location of the user controls,
indicator and connectors.
Each part is identified by number and described
individually.
FRONT
SIGNAL A/B SELECT
OSD OFF
Figure 3
2.2

Function

POWER SWITCH: A push-on / push-off switch for
power input.
POWER-ON INDICATOR: This indicator illumi-
nates when power is on.
SIGNAL A/B and OSD OFF BUTTON: This button
has two functions, as follows.
Under the OSM off condition: Push to select the
signal input connector which is connected to the
computer which you want to use.
Under the OSM on condition: Push to turn off OSM.
FUNCTION SELECT BUTTONS: Push the select
buttons to choose one of the functions that is
superimposed on the display screen.
FUNCTION ADJUST BUTTONS: Push the adjust
buttons to adjust the image on the screen that is
selected via the function select buttons.
- +
ADJUST
+
-
- 1-6 -
REAR
Figure 4
CABLE COVER (UPPER)
CABLE COVER (LOWER)
DC POWER CONNECTOR
SIGNAL INPUT CONNECTOR (SIGNAL B)
BURGLARPROOF KEY LOCK HOLE: available
for KENSINGTON ® MicroSaver Security System.
SIGNAL CABLE (SIGNAL A)