Programming The Mode Settings - Guardian PetSafe Operating Manual

Barrier
Transmitter
___________________________________________________________________

Programming the Mode Settings

All programming is done through the Barrier Transmitter and the programming is
synchronized with the Receiver Collar. The Receiver Collar cannot be programmed
separately from the Barrier Transmitter.
You may synchronize multiple Receiver Collars to a single Barrier Transmitter at one
time. However, make sure any Receiver Collar you do
not wish to synchronize is turned OFF ( ) during the programming procedure. Any
collar that is within 10 feet of the Barrier Transmitter and turned ON ( | ) will be
reprogrammed. Familiarize yourself with the 3 steps outlined below before attempting
to program the Barrier Transmitter and Receiver Collar.
When the Barrier Transmitter is set to
mode AB, the Barrier Transmitter denies
access to any and all pets wearing the
Receiver Collar.
www.petsafe.net 9