Guardian PetSafe Operating Manual page 10

Guardian extra indoor pet barrier
Table of Contents

Advertisement

Available languages

Available languages

Important: Do not perform set up procedures while the Receiver
Collar is on your pet.
1. Gather the Receiver Collar(s) you wish to synchronize with the Barrier
Transmitter. Turn the Receiver Collar(s) ON ( | ) and place near the
Barrier Transmitter.
2. Begin with the Barrier Transmitter turned OFF. Press and hold the
DOWN (-) arrow button until a vertical bar appears in the LCD display
window (continue to press and hold the DOWN (-) arrow button
through the end of Step 3b). This bar will indicate the mode the Barrier
Transmitter is currently set at. Unless you choose to change the mode, the
Receiver Collar will be programmed to the mode setting on the Barrier
Transmitter.
3. To change the mode setting, continue to hold the DOWN (-) arrow button
and press and release the UP (+) arrow button. Each time you press and
release the UP (+) arrow button you will notice the vertical bar will move
from mode A to mode B and to mode AB.
a. To program the Barrier Transmitter and Receiver Collar to either
mode A or mode B:
i. Continue to hold the DOWN (-) arrow button and press and
release the UP (+) arrow button to select the desired mode.
10
1-800-732-2677 (US) • 1-800-457-3911 (Canada)

Hide quick links:

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the PetSafe and is the answer not in the manual?

Questions and answers

Shelley
April 16, 2025

Hi, we just opened the box and I tried to scan, per instructions and not sure if that even worked. It looks like I need the user guide to set it up. Can you help please.

User image 68000fb749710
1 comments:
Shelley
April 16, 2025

@Shelley these manuals don’t show anything that ‘user manual’.

Subscribe to Our Youtube Channel

Table of Contents