(Display Set) Menu; Display Settings (Marker/Display Output, Etc.) - Sony NXCAM HXR-NX3 Operating Manual

(DISPLAY SET)
menu
Display settings (MARKER/DISPLAY
OUTPUT, etc.)
The default settings are marked with B.
See page 81 for details on selecting
menu items.
Press the MENU button t select
(DISPLAY SET) with the SEL/PUSH
EXEC dial.
HISTOGRAM
The histogram displays the luminance
distribution that shows how many pixels of
a particular brightness exist in the image.
B OFF
Does not display the histogram.
ON
Displays a histogram. A line appears at the
100% position, and the color of the zone
above the line changes.
ON[ZEBRA POINT]
The histogram shows the point where the
zebra pattern appears. A line is displayed
at the brightness level set with [ZEBRA].
z Tips
• You can assign this function to an ASSIGN
button (p. 62).
Histogram
ZEBRA
You can display a zebra pattern as a guide
for adjusting brightness.
x ON/OFF
B OFF
Does not display the zebra pattern.
ON ( and the brightness level)
The zebra pattern is not recorded with the
image.
LEVEL
x
You can select the brightness level.
B70 to 100 or 100+
z Tips
• The zebra pattern is a stripe pattern that appears
in areas of brightness equal to or exceeding the
brightness level you have set.
• You can assign [ON/OFF] to an ASSIGN button
(p. 62).
PEAKING
x ON/OFF
B OFF
Does not display the peaking.
ON ( )
You can display an image on the LCD
screen with its outlines enhanced. This
function helps you to adjust the focus.
x COLOR
You can select peaking color.
BWHITE, RED, YELLOW
x LEVEL
You can select a peaking sensitivity.
HIGH, BMIDDLE, LOW
b Notes
• The enhanced outlines will not be recorded on
the recording media.
93
Continued ,