Sony NXCAM HXR-NX3 Operating Manual page 109

Black bands appear when you record a TV screen or computer screen.
• This can be improved by adjusting the shutter speed (p. 39).
Fine patterns flicker, diagonal lines look jagged.
• Adjust [DETAIL] to the negative side (p. 58).
The time code is not recorded in sequence.
• The time code may not be recorded sequentially if you change the settings of [
FORMAT].
Playback
Refer also to the "Memory card" section (p. 106).
The desired images cannot be found. Images cannot be played back.
• Select the recording media and image quality of the image you want to play back on the
VISUAL INDEX screen (p. 64).
• Image data cannot be played back if you have modified file names or folders, or have edited
the data on a computer (When viewing still images, the file name flashes). This is not a
malfunction (p. 120).
• Images recorded on other devices may not be played back, or displayed in incorrect size. This
is not a malfunction.
• Display the VISUAL INDEX screen, touch twice on the thumbnail of the image you want to
play back, or select the thumbnail with B/V/v/b buttons and press the EXEC button (p. 65).
The data file name is displayed incorrectly, or flashing.
• The file is damaged.
• The file format is not supported on your camcorder (p. 118).
• Only the file name is displayed, if the folder structure does not conform to the universal
standard.
No sound or only a low sound is heard.
• Turn up the volume (p. 66).
"---" is displayed on the LCD screen.
• Bars will be displayed for the camera data of the movies recorded with [COLOR BAR] set to
[ON].
• Bars will be displayed for the exposure compensation value and flash information of the still
images created with [PHOTO CAPTURE].
REC
109
Continued ,