Step 6: Adjusting The Lcd Screen And Viewfinder - Sony NXCAM HXR-NX3 Operating Manual

Step 6: Adjusting the LCD screen and viewfinder

Using the LCD screen
The LCD screen can be rotated in the range
as illustrated below, allowing a person other
than the camera operator to see the image.
Open 180
degrees.
90 degrees
(max.)
180 degrees
(max.)
Adjusting the viewfinder
Viewfinder lens
adjustment lever
Move it until the picture
becomes clear.
b Notes
• You may see primary colors shimmering in the
viewfinder when you move your line of sight.
This is not a malfunction. The shimmering
colors will not be recorded on the recording
media.
24
z Tips
• You can adjust the brightness of the viewfinder
backlight from [VF BACKLIGHT] (p. 96).
When the picture in the viewfinder is
hard to see
If you cannot see the picture in the
viewfinder clearly under bright
circumstances, use the supplied large
eyecup. To attach the large eyecup, stretch
it slightly and fit it over the groove of the
eyecup attached to the camcorder. You can
attach the large eyecup facing either the
right or left side.
Large eyecup
(supplied)
Attach with
the protruding
part at the top.
b Notes
• Do not remove the pre-attached eyecup.