Step 4: Attaching The Accessory Shoe; Step 5: Turning On The Camcorder And Setting The Date And Time - Sony NXCAM HXR-NX3 Operating Manual

Step 4: Attaching the
accessory shoe
When attaching an accessory other than the
handle, attach the accessory shoe plate to
the accessory shoe.
To mount the accessory shoe
Mount the accessory shoe on the accessory
shoe mount as illustrated.
Accessory shoe
1 Lift the edge of the accessory shoe plate
and pull it in the direction opposite to
that of the arrow on the accessory shoe
plate and remove it from the accessory
shoe.
2 Place the accessory shoe as its
protrusions matches recesses of the
accessory shoe mount, then fix it to the
mount with four screws.
3 Insert the accessory shoe plate in the
direction of the arrow on the plate
surface until the end of the plate
engages the end of the shoe.
To remove the accessory shoe
Remove the shoe plate in the same way as
step 1 of "To mount the accessory shoe."
Loosen the 4 screws and remove the
accessory shoe from the accessory shoe
mount.
22
Accessory shoe plate
Accessory
shoe
Accessory
shoe plate
Step 5: Turning on the
camcorder and
setting the date and
time
Turning on the camcorder
Slide the POWER switch to ON while
pressing the green button.
When you use your camcorder for the first
time, the [CLOCK SET] screen appears.
To turn off the power
Slide the POWER switch to OFF.
b Notes
• If warning messages appear on the LCD screen,
follow the instructions.
Press and hold
the green
button.