Polycom SoundPoint IP 550 User Manual page 12

User Guide SoundPoint IP 550 Phone
1 - 4
AC Power
To connect the AC power:
1. Connect the supplied network cable between the LAN jack on the phone
and the LAN port on the wall or hub/switch device port.
Connect the DC plug on the power adapter to the DC 24V jack marked on
2.
the SoundPoint IP 550 phone or DCjack marked on the SoundPoint IP 560
phone.
3. Connect the country-specific AC cord to the power adapter.
Power
Adapter
(24V DC)
Network
Port
Power
Adapter
(48V DC)
Network
Port
Power over Ethernet
Using a regular CAT5 cable (optional accessory from Polycom), the phone can
be powered from a PoE (IEEE 802.3af) compliant switch or hub.
PC Connection
(optional)
SoundPoint IP 550
PC Connection
(optional)
SoundPoint IP 560