Menu > Event > Motion - Win4NET H.264 8-Channel Mobile DVR User Manual

Preset feature on PTZ camera can be activated by the Event triggering. When Event occurs, PTZ
moves to the preset position where event and positions are. The above menu shows that sensor
1 is set to activate cameras 1, 2, 3 and 4. If you click PTZ section, PTZ preset (position) can be
set for cameras in the event of Sensor activation.
PTZ event related preset can be synch only with Sensor/Motion/Video Loss events. If there are
multi events occur to a camera at same time, it takes events in order of Sensor > Motion > Video
Loss.
.
2-6-2. MENU > EVENT > Motion
In Motion, system provides Motion Detection
function. Set Motion Detection using Sensitivity.
Sensitivity: Select motion sensitivity from very
Low to Very High.
In Record, each camera can be connected to
single or multiple motion detections from other
cameras. Press to select cameras to be
synchronized with motions detections.
In Alarm, each camera with motion can be
connected to single and multiple alarms. Press
to select alarms to be connected to cameras
for motion events
43