Rear Panel - Win4NET H.264 8-Channel Mobile DVR User Manual

2-3-2 Rear panel

Note
: To connect cables on rear panel, the cover should be removed first and pass cables
through the hole on cover.
Video/Audio Input, Camera power supply
IO Box/Control Box/Network
Network port : Use UTP cable and connect to network and do remote view, playback & setup.
IO Box 1/2 port : Connect IO box with UTP Cable. IO Box extend features such as
Sensor/Alarm, RS232, RS485.
Power input
This DVR can be operated with 12V and 24V power supplied vehicle. Connect pin 1,2
on (+) of battery. Pin 3 to (ACC) (+). Pin 4 as ground.
Use 'audio/video' accessary cable and connect 8 cameras
with camera power supply.
chapture3-2. DVR Setup'.
For more details, see '
Connect to wireless network with using 3G (GPRS) router on
network port. For more details about 3G router, ask Network service
provider or router manual which provided by manufacture
Control Box port : Use UTP Cable and connect to Control box.
When Control box is connected, the IR port on Control Box will be
used. The other IR port(on main unit) will be disabled.
15