Dvr Setup; System; Menu > System > Information - Win4NET H.264 8-Channel Mobile DVR User Manual

2. DVR Setup

2-1. System

In SYSTEM menu, System configuration options for general Information, Date &Time, User, Quick
Setup and System Log can be selected.
2-1-1. MENU > SYSTEM > Information
In Information screen, DVR Name, MAC Address, Version, Upgrade, Mac Address, Remote
Controller ID and Configuration options can be selected. Select and press DVR Name or
change DVR name. Use virtual keyboard to enter DVR name.
To upgrade system, place upgrade file on USB Flash Memory and put it on DVR. Once device is
recognized, press upgrade button to execute system upgrade.
Upgrade will take approximately 5 minutes. DVR will reboot automatically when the upgrade is
completed.
Note
: DO NOT remove USB Flash Memory or turn off the system during the upgrade. Removing
USB Flash Memory or Turning off the system during the upgrade may cause system
malfunctioning.
Vehicle Information
Remote Control ID
Enter Remote Control ID to control multiple DVRs individually. If Remote Control ID remains as 0,
no need to select Remote ID when using remote controller. It will work as general ID for any
remote controls and a remote control will communicate with any DVRs with ID 0.
Camera Signal type
This DVR detect incoming signal automatically(NTSC/PAL) and select it manually.
Holding shutdown(min)
Hold power on system after turn off engine. DVR system record data during configured time and
Enter following information.
Company, Manufacture, Model, Registration
number, License number and Driver.
to
27