Charging The Battery; Switching The Phone On And Off - Nokia 6100 User Manual

G e t t i n g s t a r t e d

Charging the battery

1. Connect the lead from the
charger to the socket on
the bottom of your phone.
2. Connect the charger to an
AC wall socket.
The text Charging
displayed briefly if the
phone is switched on. If the battery is completely empty, it may take
a few minutes before the charging indicator appears on the display
or any calls can be made.
You can use the phone while the charger is connected.
The charging time depends on the charger and the battery used. For
example, charging a BL-4C battery with the ACP-12 charger takes up to
one hour and 30 minutes in standby mode.

Switching the phone on and off

Press and hold the power key
Note that if the phone displays
even though the SIM card is properly inserted, or
SIM card not supported, contact your network
operator or service provider. Your phone does not
support 5 Volt SIM cards and the card may need to
be changed.
• If the phone asks for a PIN code, key in the PIN
code (displayed as ****), and press OK.
See also PIN code request
codes on page 7.
• If the phone asks for a security code, key in the security code
(displayed as *****), and press OK.
See also Access codes on page 7.
Warning: Do not switch the phone on when wireless phone use is
prohibited or when it may cause interference or danger.
18
is
.
Insert SIM card
in Security settings on page 61 and Access