Tone Settings; Accessory Settings - Nokia 6100 User Manual

M e n u f u n c t i o n s

Tone settings

Press Menu, and select
same settings in the
Note that the settings you make, change the settings in the active
profile.
Select Incoming call alert
incoming voice call. The options are Ringing, Ascending,
once and Off.
Select Ringing tone
saved in the Gallery, select
Select Ringing volume
incoming messages. The vibrating alert does not work when the phone is
connected to a charger, desktop stand, or a car kit.
Tip: If you receive a ringing tone via OTA or by downloading, you
can save the ringing tone in the Gallery.
Select Message alert tone
messages, Keypad
tones for example, when the battery is running out of power.
Select Alert for to set the phone to ring only upon calls from phone
numbers that belong to a selected caller group. Scroll to the caller group
you want or All calls

Accessory settings

Accessory settings menu is shown only if the phone is or has been
connected to one of the following accessories: headset HDB-4,
handsfree unit CARK126, or mobile inductive loopset LPS-4.
Press Menu, and select
Headset, Handsfree
been connected to the phone.
• Select Default profile
automatically activated when you connect the selected accessory.
You can select another profile while the accessory is connected.
60
Settings and then
Profiles menu, see Profiles (Menu 3) on page 53.
to select how the phone notifies you of an
for incoming voice calls. To select ringing tones
Open gallery
and Vibrating alert
to set the alert tone for the incoming
tones, or Warning tones
and press Mark.
Settings and
or Loopset if the corresponding accessory is or has
to select the profile you want to be
Tone settings. You can find the
from the ringing tone list.
for incoming voice calls and
to set the phone to sound
Accessory settings. You can select
Ring once, Beep