Table of Contents
Advertisement
and applications. You can use this memory card to manage
your files, applications, back-ups, and so on, in the same
way as corresponding items on the media device.
Important: Do not remove the card in the middle of an
operation. Removing the card in the middle of an
operation may damage the memory card as well as the
device, and data stored on the card may be corrupted.
Keep all memory cards out of the reach of small children.
To remove the memory card, remove the back cover
with the back of the device facing you, by pressing the
back cover release button and lifting off the back cover
(See fig. 4). Remove the memory card by gently pulling
it out of the slot. Be careful not to scratch the golden
contacts of the card.
To install the memory card, remove the back cover
with the back of the device facing you, by pressing the
back cover release button and lifting off the back cover
(See fig. 4). Gently push the memory card into place
(See fig. 7). Make sure that the gold contacts of the
card are facing down.
Note: Use only compatible MultiMedia Cards (MMC)
with this device. Other memory cards, such as Secure
Digital (SD) cards, do not fit in the MMC card slot and
are not compatible with this device. Using an
incompatible memory card may damage the memory
card as well as the device, and data stored on the
incompatible card may be corrupted.
Charging the battery
While charging, do not use features such as Web browser
or RealOne player, which consume a lot of power. Too
many power-consuming activities may prevent the
battery from charging properly.
1
Connect the charger connector to the base of the
media device (See fig.2 on page 13).
2
Connect the charger to a wall outlet. The battery
indicator bar starts scrolling in the status indicator
area. The media device can be used while charging. If
the battery is completely discharged, it may take up to
a few minutes before the charging indicator is shown.
3
When the battery is fully charged, the bar stops
scrolling. Disconnect the charger from the media
device, then from the outlet.
See also "Battery information" on page 132 and
"Enhancements, batteries, and chargers" on page 11.
Switching on the device
WARNING: To use any features in this device, other
than active alarms, the device must be switched on. Do
not switch the device on when wireless phone use may
cause interference or danger.
To switch the device on or off, press and hold the
power key
. This device can be used without the
phone functions when the Flight profile is selected. For
more information, see "Profiles" on page 43.
16
Advertisement
Table of Contents
