Volvo S60 Owner's Manual page 91

2
Power seat
Power seat adjustment controls
Front edge of seat cushion up/down
Seat forward/rearward and up/down
Backrest tilt
Operation
The seats can be adjusted for a short period
after unlocking the door with the remote con-
trol without the key in the ignition slot. Seat
adjustment is normally made when the igni-
tion is on and can always be made when the
engine is running.
Optional on certain models
2
NOTE
•
Only one of the power seat's controls
can be used at the same time.
•
The power seats have an overload
protector that activates if a seat is
blocked by any object. If this occurs,
switch off the ignition (key in posi-
tion 0) and wait for a short period
before operating the seat again.
Power seat memory function
Power seat memory buttons
Button for storing a position
Button for storing a position
03 Your driving environment
Button for storing a position
M (memory) button
Programming the seat's memory
Three different seating and door mirror posi-
tions can be stored in the driver seat's mem-
ory.
The following example explains how button
(1) can be programmed. Buttons (2) and (3)
are programmed in the same way.
To program (store) a seat and door mirror
position in button (1):
1. Move the seat (and door mirrors) to the
desired positions using the seat and mir-
ror adjustment controls.
2. Press and hold down the M (memory)
button (4).
3. With the memory button depressed,
press button (1) briefly to store the cur-
rent position for the seat/mirrors.
To move the seat and mirrors to the posi-
tion that they were in when a button was
programmed:
– Press and hold down button (1) until the
seat and mirrors stop moving.
Seats
03
89