Volvo S60 Owner's Manual page 58

02 Locks and alarm
Remote key and key blade
•
To activate visual confirmation: go to
Settings Car settings
02
settings and select
confirmation light
confirmation light
MENU.
•
To activate audible confirmation: go to
Settings Car settings
settings and select
confirmation
by pressing OK/MENU.
See page 197 for a description of the menu
system.
Lock indicator
Lock/alarm indicator light
A flashing indicator light at the base of the
windshield verifies that the vehicle is locked.
56
Immobilizer (start inhibitor)
Light Each of the keys supplied with your vehicle
Door lock
contains a coded transponder. The code in
Unlock
and/or the key is transmitted to an antenna in the
by pressing OK/ ignition slot where it is compared to the code
stored in the start inhibitor module. The vehi-
cle will start only with a properly coded key. If
you misplace a key, take the other keys to a
Lock
trained and qualified Volvo service technician
Audible
for reprogramming as an anti-theft measure.
The following messages (which may appear
in the instrument panel display) are related to
the immobilizer:
Message Meaning
Insert car
Remote key not recognized
key during start. Try to start the
vehicle again.
Car key PCC with keyless drive only.
not found
Remote key not recognized
during start. Try to start the
vehicle again.
If the problem continues,
insert the remote key into
the ignition slot and try to
start the vehicle again.
Immobil- Remote key fault during
izer Try
start. Contact an authorized
start Volvo workshop.
again
CAUTION
Never use force when inserting the remote
key in the ignition slot. The vehicle cannot
be started if the transponder is damaged.
USA–FCC ID: LTQWFS 125VO
This device complies with part 15 of the FCC
rules. Operation is subject to the following
condition: (1) This device may not cause
harmful interference, and (2) this device must