Volvo S60 Owner's Manual page 238

06 Infotainment
Radio
the keypad on the center console to switch to
manual tuning (or to switch back from manual
tuning to the "list of stations" function).
Manual tuning
By default, the list of stations of the strongest
stations in the area will be displayed when
you turn TUNE (see the preceding section,
"List of stations"). While the list of stations is
displayed, press on the center console
keypad to switch to manual tuning, which
enables you to select a frequency from the
complete list of all radio frequencies availa-
ble on the currently selected waveband. In
other words, in manual tuning mode, turning
TUNE one step will change from e.g., 93.3 to
93.5, etc.).
To manually tune a station:
1. Press RADIO. Turn TUNE to scroll to the
desired waveband ( AM
06
press OK/MENU or the thumb wheel on
the steering wheel keypad to confirm.
2. Turn TUNE or the thumb wheel to select
a frequency.
236
NOTE
The radio is initially set to automatically
search for stations in the area in which you
are driving (see the preceding section,
"List of stations").
However, if you have switched to manual
tuning (by pressing
on the center console while the list of sta-
tions is displayed), the radio will remain in
manual tuning mode the next time it is
switched on. To switch back to "list of sta-
tions" mode, turn TUNE one step (to dis-
play the full list of stations) and press
.
Please note that if you press
the list of stations is not displayed, this will
activate the INFO function.
Storing preset stations
, FM1 , etc.) and
Ten preset stations can be stored for each
waveband (
Stored preset stations are selected using the
buttons on the keypad on the center console.
Manually storing preset stations
1. Tune to a station (see "Selecting a sta-
tion" on page 235).
2. Press and hold one of the number key
buttons.
on the keypad
when
AM FM1
, , etc.).
> The sound will be muted for several
seconds and when it returns, the sta-
tion has been stored on the number
key button used.
A list of preset stations can be displayed. This
function can be activated/deactivated in
AM/FM mode in FM menu Show presets
or in AM menu Show presets
Scan
The function automatically searches the cur-
rent waveband for radio stations. When a sta-
tion is found, it is played for several seconds
before scanning is resumed. While the station
is playing it can be stored as a preset in the
usual way (see "Manually storing preset sta-
tions").
– To start scanning in AM/FM mode, go to
FM menu Scan or in AM menu
Scan.
Stop station scanning by pressing EXIT.
NOTE
Storing a station interrupts the SCAN func-
tion.