Select a Channel
Consult a qualified radio technician for the right choice between the
following methods:
Use the Preprogrammed 16-Position Select Knob
After the zone you want is
displayed, turn the
16-Position Select knob to
the desired channel.
Use the Menu Entry
Press U to find CHAN.
1
Press D, E, or F
2
directly below CHAN.
The display shows the cur-
rent channel name (in this
case, DISP NW) blinking and
the zone (POL), not blinking.
Press U to find the channel
3
name you want.
OR
Use the keypad to enter the
channel number.
Note: If the channel you
selected is
unprogrammed, repeat
step 3.
ASTRO XTS 5000 Model III
CHAN
General Radio Operation
Select
Channel
CHAN
POL
DISP NW
POL
DISP SE
UNPROGRAMMED
23