General Radio Operation
Note: If the zone you selected
is unprogrammed, repeat
step 1.
2
Press h to confirm the
displayed zone and channel.
Select a Channel
Consult a qualified radio technician for the right choice between the
following methods:
Method 1: Use the Preprogrammed 16-Position Select Knob
After the zone you want is
displayed, turn the
16-Position Select knob to
the desired channel.
Method 2: Use the Menu
1
Press U to find CHAN.
2
Press D, E, or F
directly below CHAN.
The display shows the cur-
rent channel name (in this
case, DISP NW) flashing and
the zone (POL), not flashing.
3
Press U to find the channel
name you want.
OR
Use the keypad to enter the
channel number.
22
UNPROGRAMMED
FIRE
DISP NW
FIRE
DISP NW
Select
Channel
CHAN
POL
DISP NW
POL
DISP SE