General Radio Operation
Note: If the zone you selected
is unprogrammed, repeat
step 1.
Press h to confirm the
2
displayed zone and channel.
Select a Channel
Consult a qualified radio technician for the right choice between the
following methods:
Method 1: Use the Preprogrammed 16-Position Select Knob
After the zone you want is
displayed, turn the
16-Position Select knob to
the desired channel.
Method 2: Use the Menu
Press U to find CHAN.
1
Press D, E, or F
2
directly below CHAN.
The display shows the cur-
rent channel name (in this
case, DISP NW) flashing and
the zone (POL), not flashing.
Press U to find the channel
3
name you want.
OR
Use the keypad to enter the
channel number.
22
UNPROGRAMMED
FIRE
DISP NW
FIRE
DISP NW
Select
Channel
CHAN
POL
DISP NW
POL
DISP SE