Prestigio NOBILE 1510 Technical & Service Manual page 59

TECHNICAL SERVICE MANUAL
4. To remove the existing CPU, loosen the screw by a flat screwdriver,upraise the CPU socket to unlock the CPU.
(Figure 2-8)
Reassembly
1. Carefully, align the arrowhead corner of the CPU with the beveled corner of the socket, then insert CPU pins into
the holes. Tighten the screw by a flat screwdriver to locking the CPU.
2. Connect the fan's power cord to the system board, fit the heatsink upon the CPU and secure with four spring
screws.
3. Replace the CPU cover and secure with seven screws.
4. Replace the battery pack. (Refer to section 2.2.1 Reassembly)
Figure 2-8 Remove the CPU
58
Prestigio Nobile 1510