Prestigio NOBILE 1510 Technical & Service Manual page 32

Mobile computer
Hide thumbs Also See for NOBILE 1510:
Table of Contents

Advertisement

Prestigio Nobile 1510
Hardware fast Gate A20 with software programmable
1.3.12 Hard Disk Drive
Prestigio Nobile 1510 can support SATA or PATA HDD by equipped different HDD transition board.
SATA HDD: The SATA function in the ICH6 has dual modes of operation to support different operating system
conditions. In the case of Native IDE enabled operating systems, the ICH6 has separate PCI functions for serial and
parallel ATA ("enhanced mode"). To support legacy operating systems, there is only one PCI function for both the
serial and parallel ATA ports if functionality from both SATA and PATA devices is desired ("combined mode").
SATA interface transfer rates are independent of UDMA mode settings. SATA interface transfer rates will operate
at the bus's maximum speed, regardless of the UDMA mode reported by the SATA device or the system BIOS.
Features
Up-to 150MB/sec bus speed (Serial ATA Generation 1)
Compliant with Serial ATA 1.0a Specification and Serial ATA 2 Extensions 1.0.
Supports 48bit-LBA addressing
Supports Native DMA Queued command (First party DMA queued)
Also supports Legacy DMA Queued command
31
TECHNICAL SERVICE MANUAL

Advertisement

Table of Contents
loading

Table of Contents