Symbol LS2208 Product Reference Manual page 191

Clear Transmission Buffer
To clear the transmission buffer, scan the Clear Buffer bar code below, which contains only a start character, a
dash (minus), and a stop character.
•
The scanner issues a short hi/lo/hi beep.
•
The scanner erases the transmission buffer.
•
No transmission occurs.
NOTE The Clear Buffer contains only the dash (minus) character. In order to scan this command, be sure Code
39 length is set to include length 1.
Transmit Buffer
There are two methods to transmit the Code 39 buffer.
1.Scan the Transmit Buffer bar code below. Only a start character, a plus (+), and a stop character.
•
The scanner transmits and clears the buffer.
•
The scanner issues a Lo/Hi beep.
2.Scan a Code 39 bar code with a leading character other than a space.
•
The scanner appends new decode data to buffered data.
•
The scanner transmits and clears the buffer.
•
The scanner signals that the buffer was transmitted with a lo/hi beep.
•
Scanner transmits and clears the buffer.
NOTE The Transmit Buffer contains only a plus (+) character. In order to scan this command, be sure Code 39
length is set to include length 1.
Clear Buffer
Transmit Buffer
Symbologies 12 - 29