Table of Contents
Advertisement
Insert the batteries
Remove the battery cover by pressing the symbol and pulling the cover space in the direction of
the arrow.
Insert the two 1.5V (AAA size) batteries making sure the polarity (+ or -) of the batteries
matches the polarity marks inside the unit.
Replace the battery cover by sliding it in until you hear a click sound.
Note: If the RC doesn't react to pressing the buttons or the working range was decreased insert the
new batteries.
Use of RC
Use the RC by pointing it towards the RC sensor of the set. Objects between the RC and sensor may
prevent proper operation.
Note: The illustration is for your reference only; the remote sensor may locate differently with dif-
ferent model.
Cautions regarding use of RC
Do not expose the RC to liquids, and do not place in an area with high humidity.
Do not install or place the RC under direct sunlight. The heat may cause deformation of the
unit.
The RC may not work properly if the remote sensor of the main unit is under direct sunlight or
strong lighting. In such a case, change the angle of the lighting or LCD TV set, or operate the
RC closer to the remote sensor.
TV installation
Connect antenna or video facility
Use 75 Ohm coaxial cable plug or 300-75 Ohm impedance converter to plug in antenna input ter-
minal on the rear of the cabinet.
9
Advertisement
Table of Contents
