Operations - Hyundai H-LCD2008 Instruction Manual

Operations

Standby
Press POWER button to turn on or off.
TV/AV
Press TV/AV button, signal source changes as following: TV => AV => SVHS => SCART =>
YpbPr => PC => TV. By long pressing this button you will select menu as followed you can select
which source you need quickly.
Digit buttons
Directly press the number buttons to switch to the relevant program, according to the current pro-
gram digits. The selecting range of the programs is 0~199.
Switch program button
Each time after selecting a program, it will automatically turn back to one digit mode, and
press [-/--] to choose two or three digits before pressing number keys [0]~[9]: the program dig-
its will changed as follows: -- >, 1-- >.
In the state of two digits entering, the program will come back to the present one, only when
the second number is not entered within 3 seconds after the first number's entering. While in
three digits entering, the first digit will automatically be 1, and the program will come back to
the present one, only when the third number is not entered within 3 seconds after the second
number's entering.
Previous channel
Jump back to the previous program.
Mute
Pressing this button, the audio can be muted, press again, the audio will be on.
Call
Show present mode.
No.1. The number is the program number.
No.2. It is the state of the c hild lock .
No.3. The 03:03 is the current time.
No.4. The OFF TIME is the auto off time.
No.5. The SLEEP is the time that how
long the TV will auto off.
OK
Picture mode Setup [OK]:
Press this button in TV mode, to enter picture menu: BRIGHTNESS => CONTRAST => COLOUR
=> SHARPNESS. You can change the value with LEFT/RIGHT cursor buttons or V-/+ button.
10